All MIBs › HH3C-SMLK-MIB › hh3cSmlkControlVlanListLow
hh3cSmlkControlVlanListLow
Module: HH3C-SMLK-MIB
OID (symbolic): HH3C-SMLK-MIB::hh3cSmlkControlVlanListLow
OID (numeric): 1.3.6.1.4.1.25506.2.147.1.3.1.2
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Specifies the control VLANs used for receiving flush messages. The VLAN ID range, described by bitmap, is from 1 to 2048. The length of bitmap is 256 in bytes. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, and so on. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN.
What is hh3cSmlkControlVlanListLow?
This object is a 256-byte bitmap specifying which control VLANs, numbered 1 through 2048, a port should use to receive Smart Link flush messages, with each bit corresponding to one VLAN ID. Admins configure it so that a port listens on the correct control VLANs advertised by other Smart Link group members. For example, setting the bit for VLAN 100 in this bitmap enables the port to receive flush messages tagged with VLAN 100.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.147.1.3.1.2 snmpwalk -v2c -c public <target> HH3C-SMLK-MIB::hh3cSmlkControlVlanListLow
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.147.1.3.1.2.1 snmpget -v2c -c public <target> HH3C-SMLK-MIB::hh3cSmlkControlVlanListLow.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25506.2.147.1.3.1.2.1 s <value>
Start monitoring H3C access switch, dual-uplink (Smart Link redundancy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-SMLK-MIB::hh3cSmlkControlVlanListLow OID value, configure state conditions and alerts, and monitor any H3C access switch, dual-uplink (Smart Link redundancy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25506 | hh3c | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2 | hh3cCommon | HH3C-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25506.2.147 | hh3cSmlk | HH3C-SMLK-MIB |
| 1.3.6.1.4.1.25506.2.147.1 | hh3cSmlkObject | HH3C-SMLK-MIB |
| 1.3.6.1.4.1.25506.2.147.1.3 | hh3cSmlkFlushEnableTable | HH3C-SMLK-MIB |
| 1.3.6.1.4.1.25506.2.147.1.3.1 | hh3cSmlkFlushEnableEntry | HH3C-SMLK-MIB |
| 1.3.6.1.4.1.25506.2.147.1.3.1.2 | hh3cSmlkControlVlanListLow | HH3C-SMLK-MIB |