All MIBs › HH3C-SMLK-MIB › hh3cSmlkControlVlanListHigh
hh3cSmlkControlVlanListHigh
Module: HH3C-SMLK-MIB
OID (symbolic): HH3C-SMLK-MIB::hh3cSmlkControlVlanListHigh
OID (numeric): 1.3.6.1.4.1.25506.2.147.1.3.1.3
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Specifies the control VLANs used for receiving flush messages. The VLAN ID range, described by bitmap, is from 2049 to 4094. The length of bitmap is 256 in bytes. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, and so on. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN.
What is hh3cSmlkControlVlanListHigh?
This object is the companion 256-byte bitmap to hh3cSmlkControlVlanListLow, specifying which control VLANs numbered 2049 through 4094 a port should use to receive Smart Link flush messages. Admins set it together with the low-range object to cover the full VLAN ID space when configuring flush-message reception. For example, enabling reception on VLAN 3000 requires setting the corresponding bit in this high-range bitmap.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.147.1.3.1.3 snmpwalk -v2c -c public <target> HH3C-SMLK-MIB::hh3cSmlkControlVlanListHigh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.147.1.3.1.3.1 snmpget -v2c -c public <target> HH3C-SMLK-MIB::hh3cSmlkControlVlanListHigh.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25506.2.147.1.3.1.3.1 s <value>
Start monitoring H3C access switch, dual-uplink (Smart Link redundancy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-SMLK-MIB::hh3cSmlkControlVlanListHigh OID value, configure state conditions and alerts, and monitor any H3C access switch, dual-uplink (Smart Link redundancy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25506 | hh3c | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2 | hh3cCommon | HH3C-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25506.2.147 | hh3cSmlk | HH3C-SMLK-MIB |
| 1.3.6.1.4.1.25506.2.147.1 | hh3cSmlkObject | HH3C-SMLK-MIB |
| 1.3.6.1.4.1.25506.2.147.1.3 | hh3cSmlkFlushEnableTable | HH3C-SMLK-MIB |
| 1.3.6.1.4.1.25506.2.147.1.3.1 | hh3cSmlkFlushEnableEntry | HH3C-SMLK-MIB |
| 1.3.6.1.4.1.25506.2.147.1.3.1.3 | hh3cSmlkControlVlanListHigh | HH3C-SMLK-MIB |