HH3C-NTP-MIB :: hh3cNTPPeerPPoll

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › HH3C-NTP-MIB › hh3cNTPPeerPPoll

hh3cNTPPeerPPoll

Module: HH3C-NTP-MIB

OID (symbolic): HH3C-NTP-MIB::hh3cNTPPeerPPoll

OID (numeric): 1.3.6.1.4.1.25506.8.22.2.1.1.1.11

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: The interval at which the peer polls the local host.

What is hh3cNTPPeerPPoll?

This read-only signed integer reports the interval, in seconds as a power of two, at which this peer polls the local host. It reflects the peer's own polling behavior toward this device, as opposed to hh3cNTPPeerHPoll which is the reverse direction.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.8.22.2.1.1.1.11
snmpwalk -v2c -c public <target> HH3C-NTP-MIB::hh3cNTPPeerPPoll

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.8.22.2.1.1.1.11.1
snmpget -v2c -c public <target> HH3C-NTP-MIB::hh3cNTPPeerPPoll.1

Start monitoring H3C router/switch (NTP synchronization status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-NTP-MIB::hh3cNTPPeerPPoll OID value, configure state conditions and alerts, and monitor any H3C router/switch (NTP synchronization status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25506hh3cHH3C-OID-MIB
1.3.6.1.4.1.25506.8hh3cRhwHH3C-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.25506.8.22hh3cNTPHH3C-NTP-MIB
1.3.6.1.4.1.25506.8.22.2hh3cNTPPeerMIBHH3C-NTP-MIB
1.3.6.1.4.1.25506.8.22.2.1hh3cNTPPeerMIBObjectsHH3C-NTP-MIB
1.3.6.1.4.1.25506.8.22.2.1.1hh3cNTPPeerTableHH3C-NTP-MIB
1.3.6.1.4.1.25506.8.22.2.1.1.1hh3cNTPPeerEntryHH3C-NTP-MIB
1.3.6.1.4.1.25506.8.22.2.1.1.1.11hh3cNTPPeerPPollHH3C-NTP-MIB