HH3C-MIRRORGROUP-MIB :: hh3cMGStatus

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HH3C-MIRRORGROUP-MIB › hh3cMGStatus

hh3cMGStatus

Module: HH3C-MIRRORGROUP-MIB

OID (symbolic): HH3C-MIRRORGROUP-MIB::hh3cMGStatus

OID (numeric): 1.3.6.1.4.1.25506.2.68.1.1.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The status of a mirror group.  A mirror group will be inactive
when it was created.

The status of a mirror group can be changed automatically from inactive
to active when appropriate conditions were met, also, it can be changed
automatically from active to inactive when these conditions disappeared.

Followings are conditions for a mirror group to become active:
  group type          conditions
  ============================================================================
  local               mirroring-port, monitor-port
  remoteSource        mirroring-port, remote-probe vlan, reflector-port(may not
                      be supported by some products)
  remoteDestination   monitor-port, remote-probe vlan

What is hh3cMGStatus?

This read-only INTEGER (active(1)/inactive(2)) reports whether a mirror group is currently active, which happens automatically once its required conditions are met (mirroring-port and monitor-port for local groups; additionally remote-probe VLAN and possibly reflector-port for remote groups) and reverts to inactive when those conditions no longer hold. Admins check this to confirm a newly configured mirror group has all its required components in place and is actually forwarding mirrored traffic. Seeing inactive(2) on a local group would tell an admin they still need to configure both a mirroring-port and a monitor-port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.68.1.1.1.1.3
snmpwalk -v2c -c public <target> HH3C-MIRRORGROUP-MIB::hh3cMGStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.68.1.1.1.1.3.1
snmpget -v2c -c public <target> HH3C-MIRRORGROUP-MIB::hh3cMGStatus.1

Start monitoring H3C switch (port mirror group config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-MIRRORGROUP-MIB::hh3cMGStatus OID value, configure state conditions and alerts, and monitor any H3C switch (port mirror group config) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25506hh3cHH3C-OID-MIB
1.3.6.1.4.1.25506.2hh3cCommonHH3C-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.25506.2.68hh3cMirrGroupHH3C-MIRRORGROUP-MIB
1.3.6.1.4.1.25506.2.68.1hh3cMGInfoObjectsHH3C-MIRRORGROUP-MIB
1.3.6.1.4.1.25506.2.68.1.1hh3cMGObjectsHH3C-MIRRORGROUP-MIB
1.3.6.1.4.1.25506.2.68.1.1.1hh3cMGTableHH3C-MIRRORGROUP-MIB
1.3.6.1.4.1.25506.2.68.1.1.1.1hh3cMGEntryHH3C-MIRRORGROUP-MIB
1.3.6.1.4.1.25506.2.68.1.1.1.1.3hh3cMGStatusHH3C-MIRRORGROUP-MIB

Module

This MIB depends on