HH3C-LswRSTP-MIB :: hh3cdot1dStpDiameter

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HH3C-LswRSTP-MIB › hh3cdot1dStpDiameter

hh3cdot1dStpDiameter

Module: HH3C-LswRSTP-MIB

OID (symbolic): HH3C-LswRSTP-MIB::hh3cdot1dStpDiameter

OID (numeric): 1.3.6.1.4.1.25506.8.35.6.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Permitted amount of bridges between any two ends on the network.

What is hh3cdot1dStpDiameter?

The maximum number of bridge hops permitted between any two end stations on the spanning tree, from 1 to 7; the switch uses this to automatically compute appropriate STP timers for the configured network diameter.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.8.35.6.1.3
snmpwalk -v2c -c public <target> HH3C-LswRSTP-MIB::hh3cdot1dStpDiameter

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.8.35.6.1.3.1
snmpget -v2c -c public <target> HH3C-LswRSTP-MIB::hh3cdot1dStpDiameter.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.25506.8.35.6.1.3.1 i <value>

Start monitoring H3C Layer 2 switch (Rapid Spanning Tree Protocol) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-LswRSTP-MIB::hh3cdot1dStpDiameter OID value, configure state conditions and alerts, and monitor any H3C Layer 2 switch (Rapid Spanning Tree Protocol) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25506hh3cHH3C-OID-MIB
1.3.6.1.4.1.25506.8hh3cRhwHH3C-OID-MIB
1.3.6.1.4.1.25506.8.35hh3clswCommonHH3C-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.25506.8.35.6hh3cLswRstpMibHH3C-LswRSTP-MIB
1.3.6.1.4.1.25506.8.35.6.1hh3cLswRstpMibObjectHH3C-LswRSTP-MIB
1.3.6.1.4.1.25506.8.35.6.1.3hh3cdot1dStpDiameterHH3C-LswRSTP-MIB