All MIBs › HH3C-DOT11-RRM-MIB › hh3cDot11RRMChlProntoRadioElmt
hh3cDot11RRMChlProntoRadioElmt
Module: HH3C-DOT11-RRM-MIB
OID (symbolic): HH3C-DOT11-RRM-MIB::hh3cDot11RRMChlProntoRadioElmt
OID (numeric): 1.3.6.1.4.1.25506.2.75.8.1.2.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: Specify the AP and radio that will change channel at next calibration cycle. 0 is returned when getting the value of this node. This node can be configured only when the mode of channel selection control is user-triggered. When configuring, the higher 24 bits stand for the AP index, and the last 8 bits stand for the radio index. 4294967295 stand for configuring each radio on all APs.
What is hh3cDot11RRMChlProntoRadioElmt?
A write-only trigger, valid only in userTriggered channel mode, that schedules a channel change for a specific AP/radio at the next calibration cycle: the upper 24 bits identify the AP index and the lower 8 bits the radio index, with 4294967295 meaning 'every radio on every AP'; reading it always returns 0.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.75.8.1.2.1.4 snmpwalk -v2c -c public <target> HH3C-DOT11-RRM-MIB::hh3cDot11RRMChlProntoRadioElmt
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.75.8.1.2.1.4.1 snmpget -v2c -c public <target> HH3C-DOT11-RRM-MIB::hh3cDot11RRMChlProntoRadioElmt.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25506.2.75.8.1.2.1.4.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hh3cDot11RRMChlProntoRadioElmt.1
Start monitoring H3C wireless LAN controller/access point (Radio Resource Management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-DOT11-RRM-MIB::hh3cDot11RRMChlProntoRadioElmt OID value, configure state conditions and alerts, and monitor any H3C wireless LAN controller/access point (Radio Resource Management) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25506 | hh3c | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2 | hh3cCommon | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2.75 | hh3cDot11 | HH3C-DOT11-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25506.2.75.8 | hh3cDot11RRM | HH3C-DOT11-RRM-MIB |
| 1.3.6.1.4.1.25506.2.75.8.1 | hh3cDot11RRMConfigGroup | HH3C-DOT11-RRM-MIB |
| 1.3.6.1.4.1.25506.2.75.8.1.2 | hh3cDot11RRMRadioCfgTable | HH3C-DOT11-RRM-MIB |
| 1.3.6.1.4.1.25506.2.75.8.1.2.1 | hh3cDot11RRMRadioCfgEntry | HH3C-DOT11-RRM-MIB |
| 1.3.6.1.4.1.25506.2.75.8.1.2.1.4 | hh3cDot11RRMChlProntoRadioElmt | HH3C-DOT11-RRM-MIB |