HC-ALARM-MIB :: hcAlarmFallingThreshAbsValueHi

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HC-ALARM-MIB › hcAlarmFallingThreshAbsValueHi

hcAlarmFallingThreshAbsValueHi

Module: HC-ALARM-MIB

OID (symbolic): HC-ALARM-MIB::hcAlarmFallingThreshAbsValueHi

OID (numeric): 1.3.6.1.2.1.16.29.1.1.1.1.12

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-create

Description: The upper 32 bits of the absolute value for threshold for the sampled statistic. The actual threshold value is determined by the associated instances of the hcAlarmFallingThreshAbsValueLo and hcAlarmFallingThresholdValStatus objects, as follows:

ABS(threshold) = hcAlarmFallingThreshAbsValueLo + (hcAlarmFallingThreshAbsValueHi * 2^^32)

The absolute value of the threshold is adjusted as required, as described in the HcValueStatus textual convention. These three object instances are conceptually combined to represent the falling threshold for this entry.

When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is less than or equal to this threshold and the associated hcAlarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3).

After a falling event is generated, another such event will not be generated until the sampled value rises above this threshold and reaches the threshold identified by the hcAlarmRisingThreshAbsValueLo, hcAlarmRisingThreshAbsValueHi, and hcAlarmRisingThresholdValStatus objects.

This object may not be modified if the associated hcAlarmStatus object is equal to active(1).

What is hcAlarmFallingThreshAbsValueHi?

This is the upper 32 bits of the 64-bit absolute falling-threshold value, paired with its companion low-order object for thresholds beyond 32 bits. It lets falling thresholds be defined for very large counters, keeping the alarm-reset value in the same numeric range as a high rising threshold on the same 64-bit statistic. Setting the high value to 0 alongside a low value of 5000 gives a falling threshold of exactly 5000, well within 32-bit range for a moderate counter.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.16rmonITOUCHHUB
Numeric OIDNameModule
1.3.6.1.2.1.16.29hcAlarmMIBHC-ALARM-MIB
1.3.6.1.2.1.16.29.1hcAlarmObjectsHC-ALARM-MIB
1.3.6.1.2.1.16.29.1.1hcAlarmControlObjectsHC-ALARM-MIB
1.3.6.1.2.1.16.29.1.1.1hcAlarmTableHC-ALARM-MIB
1.3.6.1.2.1.16.29.1.1.1.1hcAlarmEntryHC-ALARM-MIB
1.3.6.1.2.1.16.29.1.1.1.1.12hcAlarmFallingThreshAbsValueHiHC-ALARM-MIB