All MIBs › HC-ALARM-MIB › hcAlarmCapabilities
hcAlarmCapabilities
Module: HC-ALARM-MIB
OID (symbolic): HC-ALARM-MIB::hcAlarmCapabilities
OID (numeric): 1.3.6.1.2.1.16.29.1.2.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: An indication of the high capacity alarm capabilities supported by this agent.
If the 'hcAlarmCreation' BIT is set, then this agent allows NMS applications to create entries in the hcAlarmTable.
If the 'hcAlarmNvStorage' BIT is set, then this agent allows entries in the hcAlarmTable which will be recreated after a system restart, as controlled by the hcAlarmStorageType object.
What is hcAlarmCapabilities?
This is a bitmap advertising which optional high-capacity alarm features this agent supports, such as dynamic alarm creation and non-volatile alarm storage. Management applications check it before attempting to create new alarm rows or rely on persistent storage, since not every agent implementation supports dynamic alarm creation or non-volatile alarms. If the non-volatile-storage bit is not set, a monitoring system knows any alarm entries it creates with a permanent storage type won't actually survive a reboot on this device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.16.29.1.2.1 snmpwalk -v2c -c public <target> HC-ALARM-MIB::hcAlarmCapabilities
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.16.29.1.2.1.1 snmpget -v2c -c public <target> HC-ALARM-MIB::hcAlarmCapabilities.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hcAlarmCapabilities.1
Start monitoring Vendor-neutral router/switch/probe, any manufacturer (RMON High Capacity Alarms, RFC 3434) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HC-ALARM-MIB::hcAlarmCapabilities OID value, configure state conditions and alerts, and monitor any Vendor-neutral router/switch/probe, any manufacturer (RMON High Capacity Alarms, RFC 3434) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.16 | rmon | ITOUCHHUB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.16.29 | hcAlarmMIB | HC-ALARM-MIB |
| 1.3.6.1.2.1.16.29.1 | hcAlarmObjects | HC-ALARM-MIB |
| 1.3.6.1.2.1.16.29.1.2 | hcAlarmCapabilitiesObjects | HC-ALARM-MIB |
| 1.3.6.1.2.1.16.29.1.2.1 | hcAlarmCapabilities | HC-ALARM-MIB |