All MIBs › H3C-SAN-AGG-MIB › h3cSanAggMemberStateList
h3cSanAggMemberStateList
Module: H3C-SAN-AGG-MIB
OID (symbolic): H3C-SAN-AGG-MIB::h3cSanAggMemberStateList
OID (numeric): 1.3.6.1.4.1.2011.10.2.127.2.2.1.4
Node type: OBJECT-TYPE
Type: H3cMemberList
Access: read-only
Description: List of member's state in current SAN aggregation group, where the state value is sorted in ascending order of member's ifIndex, which is consistent with the 'get' result of 'h3cSanAggMemberList'.
The explanation of this value's length is as same as the 'h3cSanAggMemberList'.
Each member's state value occupies 4 octets. The value specifications are listed as follows: 1: This member hasn't passed the link negotiation. 2: This member has passed the link negotiation but has not been selected. 3: This member has been selected.
What is h3cSanAggMemberStateList?
This read-only value lists the negotiation/selection state of each member link in a SAN aggregation group, in the same ifIndex order as h3cSanAggMemberList, with each 4-octet state value being 1 (link negotiation not passed), 2 (negotiation passed but not selected), or 3 (selected and active). Admins use it to see which of the aggregation group's member links are actually carrying traffic versus standing by or failing negotiation. For example, a member showing state 1 while its peers show state 3 indicates that link has a negotiation problem preventing it from joining the active aggregation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.10.2.127.2.2.1.4 snmpwalk -v2c -c public <target> H3C-SAN-AGG-MIB::h3cSanAggMemberStateList
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.10.2.127.2.2.1.4.1 snmpget -v2c -c public <target> H3C-SAN-AGG-MIB::h3cSanAggMemberStateList.1
Start monitoring H3C Fibre Channel SAN switch (port aggregation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the H3C-SAN-AGG-MIB::h3cSanAggMemberStateList OID value, configure state conditions and alerts, and monitor any H3C Fibre Channel SAN switch (port aggregation) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.10 | h3c | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.10.2 | h3cCommon | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.10.2.127 | h3cSan | H3C-VSAN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.10.2.127.2 | h3cSanAgg | H3C-SAN-AGG-MIB |
| 1.3.6.1.4.1.2011.10.2.127.2.2 | h3cSanAggGroupTable | H3C-SAN-AGG-MIB |
| 1.3.6.1.4.1.2011.10.2.127.2.2.1 | h3cSanAggGroupEntry | H3C-SAN-AGG-MIB |
| 1.3.6.1.4.1.2011.10.2.127.2.2.1.4 | h3cSanAggMemberStateList | H3C-SAN-AGG-MIB |