H3C-HPEOC-MIB :: h3cHPEOCCltAutoUpgradeType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsH3C-HPEOC-MIBh3cHPEOCCltAutoUpgradeType

h3cHPEOCCltAutoUpgradeType

Module: H3C-HPEOC-MIB

OID (symbolic): H3C-HPEOC-MIB::h3cHPEOCCltAutoUpgradeType

OID (numeric): 1.3.6.1.4.1.2011.10.2.84.1.10

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Type of auto upgrade status. It depends on h3cHPEOCCltAutoUpgrade status. flash - The CLT auto upgrade the firmware inside its flash to the CNUs. ftp - First download the firmware from FTP server to the CLT, then the CLT auto upgrade the firmware to the CNUs. tftp - First download the firmware from TFTP server to the CLT, then the CLT auto upgrade the firmware to the CNUs.

What is h3cHPEOCCltAutoUpgradeType?

Chooses where the CLT pulls firmware from for auto-upgrading CNUs: flash(1) uses the image already stored in the CLT's own flash, ftp(2) downloads it from an FTP server first, and tftp(3) downloads it from a TFTP server first. This only takes effect when h3cHPEOCCltAutoUpgrade is enabled, and an admin picks ftp or tftp when staging a new firmware image centrally rather than pre-loading every CLT's flash.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.10.2.84.1.10
snmpwalk -v2c -c public <target> H3C-HPEOC-MIB::h3cHPEOCCltAutoUpgradeType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.10.2.84.1.10.1
snmpget -v2c -c public <target> H3C-HPEOC-MIB::h3cHPEOCCltAutoUpgradeType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.10.2.84.1.10.1 i <value>

Start monitoring H3C EOC head-end (CLT)/customer premise (CNU) device (HomePlug AV over coax) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the H3C-HPEOC-MIB::h3cHPEOCCltAutoUpgradeType OID value, configure state conditions and alerts, and monitor any H3C EOC head-end (CLT)/customer premise (CNU) device (HomePlug AV over coax) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2011huaweiHUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.10h3cHUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.10.2h3cCommonHUAWEI-3COM-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2011.10.2.84h3cHPEOCH3C-HPEOC-MIB
1.3.6.1.4.1.2011.10.2.84.1h3cHPEOCSystemH3C-HPEOC-MIB
1.3.6.1.4.1.2011.10.2.84.1.10h3cHPEOCCltAutoUpgradeTypeH3C-HPEOC-MIB