Description: The status column for this IP VLAN entry. This object can be set to:

active(1) createAndGo(4) createAndWait(5) destroy(6)

The following values may be read: active(1) notInService(2) notReady(3).

Setting this object to createAndGo(4) causes the agent to attempt to create and commit the row based on the contents of the objects in the row. If all necessary information is present in the row and the values are acceptible to the agent, the agent will change the status to active(1). If any of the necessary objects are not available, the agent will reject the row creation request.

Setting this object to createAndWait(5) causes a row in in this table to be created. The agent sets the status to notInService(2) if all of the information is present in the row and the values are acceptible to the agent; otherwise, the agent sets the status to notReady(3).

Setting this object to active(1) is only valid when the current status is active(1) or notInService(2).

When the status changes to active(1), the agent applies the IP parmeters to the IP VLAN interface identified by the corresponding value of the a3ComIpVlanIndex object.

Setting this object to destroy(6) will remove the IP parmeters from the IP VLAN interface and remove the entry from this table.

Setting this object to destroy(6) will remove the layer 3 information from the IP VLAN interface and will remove the row from this table. Note that this action cannot be performed if there are ifStackTable entries that result in overlapping IP VLAN interfaces. Note that these dependencies must be removed first.