All MIBs › GENERIC-3COM-VLAN-MIB-1-0-6 › a3ComVlanProtocolStatus
a3ComVlanProtocolStatus
Module: GENERIC-3COM-VLAN-MIB-1-0-6
OID (symbolic): GENERIC-3COM-VLAN-MIB-1-0-6::a3ComVlanProtocolStatus
OID (numeric): 1.3.6.1.4.1.43.10.1.14.2.2.1.3
Node type: OBJECT-TYPE
Type: RowStatus
Access: read-write
Description: The status column for this VLAN interface. This OBJECT can be set to:
active(1) createAndGo(4) createAndWait(5) destroy(6)
The following values may be read: active(1) notInService(2) notReady(3).
Setting this object to createAndGo(4) causes the agent to attempt to create and commit the row based on the contents of the objects in the row. If all necessary information is present in the row and the values are acceptible to the agent, the agent will change the status to active(1). If any of the necessary objects are not available, the agent will reject the creation request.
Setting this object to createAndWait(5) causes a row in this table to be created. The agent sets the status to notInService(2) if all of the information is present in the row and the values are acceptable to the agent; otherwise, the agent sets the status to notReady(3).
Setting this object to active(1) is only valid when the current status is active(1) or notInService(2).
Row creation to this table is only possible when a corresponding VLAN entry has been created in the a3ComVlanTable with an a3ComVlanType set to vlanLayeredProtocols(16).
Setting this object to destroy(6) will remove the corresponding VLAN interface to protocol mapping.
What is a3ComVlanProtocolStatus?
This is the RowStatus control column governing a VLAN-to-protocol mapping entry, letting a management station create, activate, or destroy the row. Row creation only succeeds if a corresponding VLAN entry already exists in a3ComVlanTable with its type set to vlanLayeredProtocols(16), so this object effectively gates protocol-based VLAN classification. For example, an admin who has not first created a layered-protocols VLAN will have any createAndGo attempt on this object rejected by the agent.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.10.1.14.2.2.1.3 snmpwalk -v2c -c public <target> GENERIC-3COM-VLAN-MIB-1-0-6::a3ComVlanProtocolStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.10.1.14.2.2.1.3.1 snmpget -v2c -c public <target> GENERIC-3COM-VLAN-MIB-1-0-6::a3ComVlanProtocolStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.10.1.14.2.2.1.3.1 s <value>
Start monitoring Legacy 3Com switching equipment (VLAN + protocol-based VLAN config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GENERIC-3COM-VLAN-MIB-1-0-6::a3ComVlanProtocolStatus OID value, configure state conditions and alerts, and monitor any Legacy 3Com switching equipment (VLAN + protocol-based VLAN config) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.10 | generic | A3Com-products-MIB |
| 1.3.6.1.4.1.43.10.1 | genExperimental | GENERIC-3COM-TRUNK-MIB |
| 1.3.6.1.4.1.43.10.1.14 | genVirtual | GENERIC-3COM-VLAN-MIB-1-0-1 |
| 1.3.6.1.4.1.43.10.1.14.2 | a3ComVlanProtocolsGroup | GENERIC-3COM-VLAN-MIB-1-0-1 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.10.1.14.2.2 | a3ComVlanProtocolTable | GENERIC-3COM-VLAN-MIB-1-0-6 |
| 1.3.6.1.4.1.43.10.1.14.2.2.1 | a3ComVlanProtocolEntry | GENERIC-3COM-VLAN-MIB-1-0-6 |
| 1.3.6.1.4.1.43.10.1.14.2.2.1.3 | a3ComVlanProtocolStatus | GENERIC-3COM-VLAN-MIB-1-0-6 |