All MIBs › GENERIC-3COM-VLAN-MIB-1-0-6 › a3ComIpVlanIpNetAddress
a3ComIpVlanIpNetAddress
Module: GENERIC-3COM-VLAN-MIB-1-0-6
OID (symbolic): GENERIC-3COM-VLAN-MIB-1-0-6::a3ComIpVlanIpNetAddress
OID (numeric): 1.3.6.1.4.1.43.10.1.14.2.1.1.1
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: The IP network number for the IP VLAN interface defined in the a3ComVlanIfTable identified with the same index. The IpNetAdress and the IpNetMask must be set and the the row creation process completed by a NMS before overlapping rows in the ifStackTable can be created. Sets to the ifStackTable that produce overlapping IP IP VLAN interfaces will fail if this object is not set.
What is a3ComIpVlanIpNetAddress?
This value holds the IP network address assigned to this IP VLAN interface, matched by index to the corresponding entry in the a3ComVlanIfTable. Both this object and its paired network mask must be set and the row creation completed before the switch will allow overlapping ifStackTable bindings for that IP VLAN, so an admin must configure it before stacking the interface. For example, setting this to 10.0.5.0 alongside the matching mask defines the subnet this IP VLAN belongs to.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.10.1.14.2.1.1.1 snmpwalk -v2c -c public <target> GENERIC-3COM-VLAN-MIB-1-0-6::a3ComIpVlanIpNetAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.10.1.14.2.1.1.1.1 snmpget -v2c -c public <target> GENERIC-3COM-VLAN-MIB-1-0-6::a3ComIpVlanIpNetAddress.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.10.1.14.2.1.1.1.1 a <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> a3ComIpVlanIpNetAddress.1
Start monitoring Legacy 3Com switching equipment (VLAN + protocol-based VLAN config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GENERIC-3COM-VLAN-MIB-1-0-6::a3ComIpVlanIpNetAddress OID value, configure state conditions and alerts, and monitor any Legacy 3Com switching equipment (VLAN + protocol-based VLAN config) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.10 | generic | A3Com-products-MIB |
| 1.3.6.1.4.1.43.10.1 | genExperimental | GENERIC-3COM-TRUNK-MIB |
| 1.3.6.1.4.1.43.10.1.14 | genVirtual | GENERIC-3COM-VLAN-MIB-1-0-1 |
| 1.3.6.1.4.1.43.10.1.14.2 | a3ComVlanProtocolsGroup | GENERIC-3COM-VLAN-MIB-1-0-1 |
| 1.3.6.1.4.1.43.10.1.14.2.1 | a3ComIpVlanTable | GENERIC-3COM-VLAN-MIB-1-0-1 |
| 1.3.6.1.4.1.43.10.1.14.2.1.1 | a3ComIpVlanEntry | GENERIC-3COM-VLAN-MIB-1-0-1 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.10.1.14.2.1.1.1 | a3ComIpVlanIpNetAddress | GENERIC-3COM-VLAN-MIB-1-0-6 |