All MIBs › GENERIC-3COM-TRUNK-MIB › a3ComTrunkTcmpMacState
a3ComTrunkTcmpMacState
Module: GENERIC-3COM-TRUNK-MIB
OID (symbolic): GENERIC-3COM-TRUNK-MIB::a3ComTrunkTcmpMacState
OID (numeric): 1.3.6.1.4.1.43.10.1.15.1.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The state column for this MAC TRUNK entry if TCMP is enabled. The following values may be read:
notInUse: corresponding MAC has not been selected for active participation in trunk. No LLC frames will be transmitted or received. selected: corresponding MAC is selected for active participation in the trunk, but it has not transited to active use. inUse: corresponding MAC is in active use on the trunk.
The following values may be read if TCMP is disabled:
undefined: corresponding MAC is undefined down: corresponding MAC is selected as a trunk port but is down up: corresponding MAC is selected and in use configured: corresponding MAC is configured as TRUNK MAC
What is a3ComTrunkTcmpMacState?
This read-only INTEGER reports the TCMP state of a MAC within a trunk, with values notInUse(1)/selected(2)/inUse(3) applicable when TCMP is enabled, and undefined(4)/down(5)/up(6)/configured(7) applicable when TCMP is disabled. An admin reads this to see whether a given trunk member MAC is actively carrying traffic or merely standing by. For example, a value of inUse(3) confirms that particular MAC is currently actively participating in trunk traffic forwarding.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.10.1.15.1.2.1.3 snmpwalk -v2c -c public <target> GENERIC-3COM-TRUNK-MIB::a3ComTrunkTcmpMacState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.10.1.15.1.2.1.3.1 snmpget -v2c -c public <target> GENERIC-3COM-TRUNK-MIB::a3ComTrunkTcmpMacState.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> a3ComTrunkTcmpMacState.1
Start monitoring 3Com network device supporting TRUNK link aggregation (e.g. LANplex) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GENERIC-3COM-TRUNK-MIB::a3ComTrunkTcmpMacState OID value, configure state conditions and alerts, and monitor any 3Com network device supporting TRUNK link aggregation (e.g. LANplex) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.10 | generic | A3Com-products-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.10.1 | genExperimental | GENERIC-3COM-TRUNK-MIB |
| 1.3.6.1.4.1.43.10.1.15 | genTrunk | GENERIC-3COM-TRUNK-MIB |
| 1.3.6.1.4.1.43.10.1.15.1 | a3ComTrunkGroup | GENERIC-3COM-TRUNK-MIB |
| 1.3.6.1.4.1.43.10.1.15.1.2 | a3ComTrunkMacTable | GENERIC-3COM-TRUNK-MIB |
| 1.3.6.1.4.1.43.10.1.15.1.2.1 | a3ComTrunkMacEntry | GENERIC-3COM-TRUNK-MIB |
| 1.3.6.1.4.1.43.10.1.15.1.2.1.3 | a3ComTrunkTcmpMacState | GENERIC-3COM-TRUNK-MIB |