All MIBs › GENERIC-3COM-TRUNK-MIB › a3ComTrunkIfStatus
a3ComTrunkIfStatus
Module: GENERIC-3COM-TRUNK-MIB
OID (symbolic): GENERIC-3COM-TRUNK-MIB::a3ComTrunkIfStatus
OID (numeric): 1.3.6.1.4.1.43.10.1.15.1.1.1.5
Node type: OBJECT-TYPE
Type: RowStatus
Access: read-write
Description: The status column for this TRUNK interface. This OBJECT can be set to:
createAndGo(4) destroy(6)
The following values may be read: active(1) notReady(3).
Setting this object to createAndGo(4) causes the agent to attempt to create and commit the row based on the contents of the objects in the row. If all necessary information is present in the row and the values are acceptible to the agent, the agent will change the status to notReady(3). If any of the necessary objects are not available, the agent will reject the creation request.
The state of the row transits to active(1) if and only if MAC(s) has/have been added to this entry through ifStackTable and system is ready.
Setting this object to destroy(6) will remove the corresponding TRUNK interface and remove the entry in this table.
In order for a set of this object to destroy(6) to succeed, all dependencies on this row must have been removed. These will include any stacking dependencies in the ifStackTable.
What is a3ComTrunkIfStatus?
This read-write RowStatus column manages the lifecycle of a TRUNK interface row: an admin sets it to createAndGo(4) to create and commit a new trunk, or destroy(6) to remove one, while reads return active(1) once fully configured or notReady(3) if required objects are still missing. An admin uses this to provision or tear down link-aggregation trunks dynamically via SNMP rather than the CLI. For example, setting a3ComTrunkIfStatus to createAndGo(4) after populating the row's name and speed fields commits a new trunk, transitioning it to notReady(3) until all necessary fields are valid, then to active(1).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.10.1.15.1.1.1.5 snmpwalk -v2c -c public <target> GENERIC-3COM-TRUNK-MIB::a3ComTrunkIfStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.10.1.15.1.1.1.5.1 snmpget -v2c -c public <target> GENERIC-3COM-TRUNK-MIB::a3ComTrunkIfStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.10.1.15.1.1.1.5.1 s <value>
Start monitoring 3Com network device supporting TRUNK link aggregation (e.g. LANplex) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GENERIC-3COM-TRUNK-MIB::a3ComTrunkIfStatus OID value, configure state conditions and alerts, and monitor any 3Com network device supporting TRUNK link aggregation (e.g. LANplex) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.10 | generic | A3Com-products-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.10.1 | genExperimental | GENERIC-3COM-TRUNK-MIB |
| 1.3.6.1.4.1.43.10.1.15 | genTrunk | GENERIC-3COM-TRUNK-MIB |
| 1.3.6.1.4.1.43.10.1.15.1 | a3ComTrunkGroup | GENERIC-3COM-TRUNK-MIB |
| 1.3.6.1.4.1.43.10.1.15.1.1 | a3ComTrunkIfTable | GENERIC-3COM-TRUNK-MIB |
| 1.3.6.1.4.1.43.10.1.15.1.1.1 | a3ComTrunkIfEntry | GENERIC-3COM-TRUNK-MIB |
| 1.3.6.1.4.1.43.10.1.15.1.1.1.5 | a3ComTrunkIfStatus | GENERIC-3COM-TRUNK-MIB |