GDCMP7001-MIB :: mp7001AlarmStatus

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › GDCMP7001-MIB › mp7001AlarmStatus

mp7001AlarmStatus

Module: GDCMP7001-MIB

OID (symbolic): GDCMP7001-MIB::mp7001AlarmStatus

OID (numeric): 1.3.6.1.4.1.498.6.10.2.1.1.9

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: Returns a bit-wise Status of alarms Octet 1 bit 7 - not used bit 6 - NTWK LOS bit 5 - NTWK LOF bit 4 - NWTK_AIS bit 3 - future use bit 2 - NTWK Received YELLOW bit 1 - NTWK Excessive Zeros - not supported bit 0 - NTWK Low Average Density - not supported

Octet 2 bit 7 - not used bit 6 - NTWK BiPolar Violations bit 5 - NTWK CRC Errors bit 4 - NTWK Controlled Slips bit 3 - Unavailable Signal State bit 2 - Status Change bit 1 - Timing Loss bit 0 - Unit Failure

Octet 3 bit 7 - not used bit 6 - future use bit 5 - future use bit 4 - future use bit 3 - future use bit 2 - future use bit 1 - future use bit 0 - future use

Octet 4 bit 7 - not used bit 6 - ES bit 5 - BES bit 4 - SES bit 3 - UAS bit 2 - Unsolicited Test bit 1 - NVRAM checksum corrupted bit 0 - Power-up Alarm

What is mp7001AlarmStatus?

A 4-octet bitmap of currently active alarms on the unit -- network LOS/LOF/AIS/received-yellow and bipolar violations in the first two octets, plus errored-second, unit-failure, and NVRAM-corruption flags in the fourth -- giving an admin a single-poll snapshot of everything currently wrong with the card.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.6.10.2.1.1.9
snmpwalk -v2c -c public <target> GDCMP7001-MIB::mp7001AlarmStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.498.6.10.2.1.1.9.1
snmpget -v2c -c public <target> GDCMP7001-MIB::mp7001AlarmStatus.1

Start monitoring General DataComm (GDC) MP7001 multiport WAN access device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GDCMP7001-MIB::mp7001AlarmStatus OID value, configure state conditions and alerts, and monitor any General DataComm (GDC) MP7001 multiport WAN access device from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.498gdcDMA200-MIB
1.3.6.1.4.1.498.6dsx1GDC-5553-MIB
Numeric OIDNameModule
1.3.6.1.4.1.498.6.10mp7001SystemGDCMP7001-MIB
1.3.6.1.4.1.498.6.10.2mp7001MaintenanceGDCMP7001-MIB
1.3.6.1.4.1.498.6.10.2.1mp7001MaintenanceTableGDCMP7001-MIB
1.3.6.1.4.1.498.6.10.2.1.1mp7001MaintenanceEntryGDCMP7001-MIB
1.3.6.1.4.1.498.6.10.2.1.1.9mp7001AlarmStatusGDCMP7001-MIB