All MIBs › GDC-5553-MIB › sc5553SwitchActiveFirmware
sc5553SwitchActiveFirmware
Module: GDC-5553-MIB
OID (symbolic): GDC-5553-MIB::sc5553SwitchActiveFirmware
OID (numeric): 1.3.6.1.4.1.498.6.5.1.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to switch the active executing firmware from the version in sc5553ActiveFirmwareRev to the version in sc5553StoredFirmwareRev.
When a switchActive(2) is set (write only) the element will: 1) reboot 2) uncompress stored code into active area 3) perform checksum on active area 4) Set sc5553StoredStatus object to indicate results 5) If succesfull: update sc5553ActiveFirmwareRev and sc5553StoredFirmwareRev and begin executing If failed: replace active area with previous revision
The switchNorm(1) enumeration will always be read.
Setting switchActive(2) when the sc5553StoredFirmwareStatus is not statOK(3) will result in an error. Valid [i]nterface = 0
What is sc5553SwitchActiveFirmware?
A write action that, when set to switchActive(2) while sc5553StoredFirmwareStatus is statOK, makes the unit reboot, uncompress and checksum the stored image, and if successful begin running it as the new active firmware — setting it when the stored image isn't verified good results in an error.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.6.5.1.2.1.6 snmpwalk -v2c -c public <target> GDC-5553-MIB::sc5553SwitchActiveFirmware
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.6.5.1.2.1.6.1 snmpget -v2c -c public <target> GDC-5553-MIB::sc5553SwitchActiveFirmware.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.498.6.5.1.2.1.6.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> sc5553SwitchActiveFirmware.1
Start monitoring General DataComm (GDC) 5553-series data communications equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GDC-5553-MIB::sc5553SwitchActiveFirmware OID value, configure state conditions and alerts, and monitor any General DataComm (GDC) 5553-series data communications equipment from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.498 | gdc | DMA200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498.6 | dsx1 | GDC-5553-MIB |
| 1.3.6.1.4.1.498.6.5 | sc5553 | GDC-5553-MIB |
| 1.3.6.1.4.1.498.6.5.1 | sc5553Version | GDC-5553-MIB |
| 1.3.6.1.4.1.498.6.5.1.2 | sc5553VersionTable | GDC-5553-MIB |
| 1.3.6.1.4.1.498.6.5.1.2.1 | sc5553VersionEntry | GDC-5553-MIB |
| 1.3.6.1.4.1.498.6.5.1.2.1.6 | sc5553SwitchActiveFirmware | GDC-5553-MIB |