All MIBs › GDC-5553-MIB › sc5553DiagTestResults
sc5553DiagTestResults
Module: GDC-5553-MIB
OID (symbolic): GDC-5553-MIB::sc5553DiagTestResults
OID (numeric): 1.3.6.1.4.1.498.6.5.5.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The results of the last diagnostic test. This can be the current test running or the last completed test.
The units of the value of this object depend on the type of diagnostic test run. For all cases except a network delay measurement, the units of the value of this object is the number of bit errors that occurred. Bit errors can be read at any time during the duration of the test. The valid range for bit errors is 0 to 4,095. 65,535 will be returned if for any reason the test was terminated early. 32,770 will be returned if the number of bit errors exceeds 4,095. For a network delay measurement, the units of the value of this test are milliseconds. If the test is terminated early than 65,535 will be returned and if the delay is greater than 4,095 milliseconds then 32,770 will be returned.
What is sc5553DiagTestResults?
Reports the outcome of the current or most recently completed diagnostic test on this channel — a bit-error count (0-4095, with 32,770 meaning 'exceeded' and 65,535 meaning 'terminated early') for pattern tests, or milliseconds of delay for a network delay measurement.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.6.5.5.1.1.3 snmpwalk -v2c -c public <target> GDC-5553-MIB::sc5553DiagTestResults
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.6.5.5.1.1.3.1 snmpget -v2c -c public <target> GDC-5553-MIB::sc5553DiagTestResults.1
Start monitoring General DataComm (GDC) 5553-series data communications equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GDC-5553-MIB::sc5553DiagTestResults OID value, configure state conditions and alerts, and monitor any General DataComm (GDC) 5553-series data communications equipment from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.498 | gdc | DMA200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498.6 | dsx1 | GDC-5553-MIB |
| 1.3.6.1.4.1.498.6.5 | sc5553 | GDC-5553-MIB |
| 1.3.6.1.4.1.498.6.5.5 | sc5553Diagnostics | GDC-5553-MIB |
| 1.3.6.1.4.1.498.6.5.5.1 | sc5553DiagTable | GDC-5553-MIB |
| 1.3.6.1.4.1.498.6.5.5.1.1 | sc5553DiagEntry | GDC-5553-MIB |
| 1.3.6.1.4.1.498.6.5.5.1.1.3 | sc5553DiagTestResults | GDC-5553-MIB |