All MIBs › GBNDeviceSWAPI-MIB › sIfMauDefaultType
sIfMauDefaultType
Module: GBNDeviceSWAPI-MIB
OID (symbolic): GBNDeviceSWAPI-MIB::sIfMauDefaultType
OID (numeric): 1.3.6.1.4.1.13464.1.2.2.2.6.2.1.1.11
Node type: OBJECT-TYPE
Type: OBJECT IDENTIFIER
Access: read-write
Description: This object identifies the default administrative 10 or 100 Mb/s baseband MAU type, to be used in conjunction with the operational MAU type denoted by sIfMauType.
The set of possible values for this object is the same as the set defined for the sIfMauType object.
This object represents the administratively- configured type of the MAU. If auto-negotiation is not enabled or is not implemented for this MAU, the value of this object determines the operational type of the MAU. In this case, a set to this object will force the MAU into the specified operating mode.
If auto-negotiation is implemented and enabled for this MAU, the operational type of the MAU is determined by auto-negotiation, and the value of this object denotes the type to which the MAU will automatically revert if/when auto-negotiation is later disabled.
NOTE TO IMPLEMENTORS: It may be necessary to provide for underlying hardware implementations which do not follow the exact behavior specified above. In particular, when sIfMauAutoNegAdminStatus transitions from enabled to disabled, the agent implementation must ensure that the operational type of the MAU (as reported by sIfMauType) correctly transitions to the value specified by this object, rather than continuing to operate at the value earlier determined by the auto-negotiation function.
What is sIfMauDefaultType?
Sets or reports the administratively configured MAU type used when auto-negotiation is disabled (or as the fallback speed/duplex once negotiation is turned off). Writing a new value forces the port into that operating mode.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.13464.1.2.2.2.6.2.1.1.11 snmpwalk -v2c -c public <target> GBNDeviceSWAPI-MIB::sIfMauDefaultType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.13464.1.2.2.2.6.2.1.1.11.1 snmpget -v2c -c public <target> GBNDeviceSWAPI-MIB::sIfMauDefaultType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.13464.1.2.2.2.6.2.1.1.11.1 s <value>
Start monitoring Ethernet switch driver/OEM switch silicon (100Mb/1000Mb queue scheduling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GBNDeviceSWAPI-MIB::sIfMauDefaultType OID value, configure state conditions and alerts, and monitor any Ethernet switch driver/OEM switch silicon (100Mb/1000Mb queue scheduling) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.13464 | admin | ADMIN-MASTER-MIB |
| 1.3.6.1.4.1.13464.1 | dataCom | ADMIN-MASTER-MIB |
| 1.3.6.1.4.1.13464.1.2 | gbn | ADMIN-MASTER-MIB |
| 1.3.6.1.4.1.13464.1.2.2 | gbnDevice | ADMIN-MASTER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.13464.1.2.2.2 | bcmSwapi | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.6 | sRFC2239MIB | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.6.2 | sDot3IfMauBasicGroup | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.6.2.1 | sIfMauTable | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.6.2.1.1 | sIfMauEntry | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.6.2.1.1.11 | sIfMauDefaultType | GBNDeviceSWAPI-MIB |