All MIBs › GBNDeviceSWAPI-MIB › sIfMauAutoNegAdminStatus
sIfMauAutoNegAdminStatus
Module: GBNDeviceSWAPI-MIB
OID (symbolic): GBNDeviceSWAPI-MIB::sIfMauAutoNegAdminStatus
OID (numeric): 1.3.6.1.4.1.13464.1.2.2.2.6.5.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting this object to enabled(1) will cause the interface which has the auto-negotiation signaling ability to be enabled.
If the value of this object is disabled(2) then the interface will act as it would if it had no auto-negotiation signaling. Under these conditions, an IEEE 802.3 MAU will immediately be forced to the state indicated by the value of the object sIfMauDefaultType.
NOTE TO IMPLEMENTORS: When sIfMauAutoNegAdminStatus transitions from enabled to disabled, the agent implementation must ensure that the operational type of the MAU (as reported by sIfMauType) correctly transitions to the value specified by the sIfMauDefaultType object, rather than continuing to operate at the value earlier determined by the auto-negotiation function.
What is sIfMauAutoNegAdminStatus?
Turns auto-negotiation on or off for the MAU. Disabling it forces the link to the value in sIfMauDefaultType instead of negotiating speed/duplex with the far end - a common step when working around a duplex-mismatch problem with older equipment.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.13464.1.2.2.2.6.5.1.1.1 snmpwalk -v2c -c public <target> GBNDeviceSWAPI-MIB::sIfMauAutoNegAdminStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.13464.1.2.2.2.6.5.1.1.1.1 snmpget -v2c -c public <target> GBNDeviceSWAPI-MIB::sIfMauAutoNegAdminStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.13464.1.2.2.2.6.5.1.1.1.1 i <value>
Start monitoring Ethernet switch driver/OEM switch silicon (100Mb/1000Mb queue scheduling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GBNDeviceSWAPI-MIB::sIfMauAutoNegAdminStatus OID value, configure state conditions and alerts, and monitor any Ethernet switch driver/OEM switch silicon (100Mb/1000Mb queue scheduling) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.13464 | admin | ADMIN-MASTER-MIB |
| 1.3.6.1.4.1.13464.1 | dataCom | ADMIN-MASTER-MIB |
| 1.3.6.1.4.1.13464.1.2 | gbn | ADMIN-MASTER-MIB |
| 1.3.6.1.4.1.13464.1.2.2 | gbnDevice | ADMIN-MASTER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.13464.1.2.2.2 | bcmSwapi | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.6 | sRFC2239MIB | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.6.5 | sDot3IfMauAutoNegGroup | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.6.5.1 | sIfMauAutoNegTable | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.6.5.1.1 | sIfMauAutoNegEntry | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.6.5.1.1.1 | sIfMauAutoNegAdminStatus | GBNDeviceSWAPI-MIB |