All MIBs › GBNDeviceSWAPI-MIB › sEtherStatsOctets
sEtherStatsOctets
Module: GBNDeviceSWAPI-MIB
OID (symbolic): GBNDeviceSWAPI-MIB::sEtherStatsOctets
OID (numeric): 1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.4
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
This object can be used as a reasonable estimate of ethernet utilization. If greater precision is desired, the etherStatsPkts and etherStatsOctets objects should be sampled before and after a common interval. The differences in the sampled values are Pkts and Octets, respectively, and the number of seconds in the interval is Interval. These values are used to calculate the Utilization as follows:
Pkts * (9.6 + 6.4) + (Octets * .8) Utilization = ------------------------------------- Interval * 10,000
The result of this equation is the value Utilization which is the percent utilization of the ethernet segment on a scale of 0 to 100 percent.
What is sEtherStatsOctets?
Raw byte counter for everything received on the port (excluding framing bits, including FCS), used as the basis for calculating link utilization percentage over a polling interval.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.4 snmpwalk -v2c -c public <target> GBNDeviceSWAPI-MIB::sEtherStatsOctets
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.4.1 snmpget -v2c -c public <target> GBNDeviceSWAPI-MIB::sEtherStatsOctets.1
Start monitoring Ethernet switch driver/OEM switch silicon (100Mb/1000Mb queue scheduling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GBNDeviceSWAPI-MIB::sEtherStatsOctets OID value, configure state conditions and alerts, and monitor any Ethernet switch driver/OEM switch silicon (100Mb/1000Mb queue scheduling) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.13464 | admin | ADMIN-MASTER-MIB |
| 1.3.6.1.4.1.13464.1 | dataCom | ADMIN-MASTER-MIB |
| 1.3.6.1.4.1.13464.1.2 | gbn | ADMIN-MASTER-MIB |
| 1.3.6.1.4.1.13464.1.2.2 | gbnDevice | ADMIN-MASTER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.13464.1.2.2.2 | bcmSwapi | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.5 | sRFC1757MIB | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.5.1 | sRFC1757Statistics | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.5.1.1 | sEtherStatsTable | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1 | sEtherStatsEntry | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.4 | sEtherStatsOctets | GBNDeviceSWAPI-MIB |