All MIBs › GBNDeviceSWAPI-MIB › sDot1qTpFdbStatus
sDot1qTpFdbStatus
Module: GBNDeviceSWAPI-MIB
OID (symbolic): GBNDeviceSWAPI-MIB::sDot1qTpFdbStatus
OID (numeric): 1.3.6.1.4.1.13464.1.2.2.2.8.2.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The status of this entry. The meanings of the values are: other(1) - none of the following. This may include the case where some other MIB object (not the corresponding instance of dot1qTpFdbPort, nor an entry in the dot1qStaticUnicastTable) is being used to determine if and how frames addressed to the value of the corresponding instance of dot1qTpFdbAddress are being forwarded. invalid(2) - this entry is no longer valid (e.g., it was learned but has since aged out), but has not yet been flushed from the table. learned(3) - the value of the corresponding instance of dot1qTpFdbPort was learned and is being used.
self(4) - the value of the corresponding instance of dot1qTpFdbAddress represents one of the device's addresses. The corresponding instance of dot1qTpFdbPort indicates which of the device's ports has this address. mgmt(5) - the value of the corresponding instance of dot1qTpFdbAddress is also the value of an existing instance of dot1qStaticAddress.
What is sDot1qTpFdbStatus?
Same style of status as the 802.1D FDB table, but scoped per-VLAN: learned(3) is a normal dynamic entry while self(4) marks one of the switch's own addresses within that VLAN.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.13464.1.2.2.2.8.2.2.1.3 snmpwalk -v2c -c public <target> GBNDeviceSWAPI-MIB::sDot1qTpFdbStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.13464.1.2.2.2.8.2.2.1.3.1 snmpget -v2c -c public <target> GBNDeviceSWAPI-MIB::sDot1qTpFdbStatus.1
Start monitoring Ethernet switch driver/OEM switch silicon (100Mb/1000Mb queue scheduling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GBNDeviceSWAPI-MIB::sDot1qTpFdbStatus OID value, configure state conditions and alerts, and monitor any Ethernet switch driver/OEM switch silicon (100Mb/1000Mb queue scheduling) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.13464 | admin | ADMIN-MASTER-MIB |
| 1.3.6.1.4.1.13464.1 | dataCom | ADMIN-MASTER-MIB |
| 1.3.6.1.4.1.13464.1.2 | gbn | ADMIN-MASTER-MIB |
| 1.3.6.1.4.1.13464.1.2.2 | gbnDevice | ADMIN-MASTER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.13464.1.2.2.2 | bcmSwapi | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.8 | sDot1QMIB | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.8.2 | sDot1qTp | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.8.2.2 | sDot1qTpFdbTable | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.8.2.2.1 | sDot1qTpFdbEntry | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.8.2.2.1.3 | sDot1qTpFdbStatus | GBNDeviceSWAPI-MIB |