GBNDeviceSWAPI-MIB :: sDot1qStaticMulticastStatus

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › GBNDeviceSWAPI-MIB › sDot1qStaticMulticastStatus

sDot1qStaticMulticastStatus

Module: GBNDeviceSWAPI-MIB

OID (symbolic): GBNDeviceSWAPI-MIB::sDot1qStaticMulticastStatus

OID (numeric): 1.3.6.1.4.1.13464.1.2.2.2.8.3.2.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out.

What is sDot1qStaticMulticastStatus?

Controls the lifecycle of a static multicast filtering entry: permanent(3) survives reboots, deleteOnReset(4) is cleared on the next bridge reset, and writing invalid(2) deletes the entry immediately.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.13464.1.2.2.2.8.3.2.1.5
snmpwalk -v2c -c public <target> GBNDeviceSWAPI-MIB::sDot1qStaticMulticastStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.13464.1.2.2.2.8.3.2.1.5.1
snmpget -v2c -c public <target> GBNDeviceSWAPI-MIB::sDot1qStaticMulticastStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.13464.1.2.2.2.8.3.2.1.5.1 i <value>

Start monitoring Ethernet switch driver/OEM switch silicon (100Mb/1000Mb queue scheduling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GBNDeviceSWAPI-MIB::sDot1qStaticMulticastStatus OID value, configure state conditions and alerts, and monitor any Ethernet switch driver/OEM switch silicon (100Mb/1000Mb queue scheduling) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.13464adminADMIN-MASTER-MIB
1.3.6.1.4.1.13464.1dataComADMIN-MASTER-MIB
1.3.6.1.4.1.13464.1.2gbnADMIN-MASTER-MIB
1.3.6.1.4.1.13464.1.2.2gbnDeviceADMIN-MASTER-MIB
Numeric OIDNameModule
1.3.6.1.4.1.13464.1.2.2.2bcmSwapiGBNDeviceSWAPI-MIB
1.3.6.1.4.1.13464.1.2.2.2.8sDot1QMIBGBNDeviceSWAPI-MIB
1.3.6.1.4.1.13464.1.2.2.2.8.3sDot1qStaticGBNDeviceSWAPI-MIB
1.3.6.1.4.1.13464.1.2.2.2.8.3.2sDot1qStaticMulticastTableGBNDeviceSWAPI-MIB
1.3.6.1.4.1.13464.1.2.2.2.8.3.2.1sDot1qStaticMulticastEntryGBNDeviceSWAPI-MIB
1.3.6.1.4.1.13464.1.2.2.2.8.3.2.1.5sDot1qStaticMulticastStatusGBNDeviceSWAPI-MIB