All MIBs › GBNDeviceSWAPI-MIB › sDot1dTpFdbStatus
sDot1dTpFdbStatus
Module: GBNDeviceSWAPI-MIB
OID (symbolic): GBNDeviceSWAPI-MIB::sDot1dTpFdbStatus
OID (numeric): 1.3.6.1.4.1.13464.1.2.2.2.4.4.3.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The status of this entry. The meanings of the values are:
other(1) : none of the following. This would include the case where some other MIB object (not the corresponding instance of dot1dTpFdbPort, nor an entry in the dot1dStaticTable) is being used to determine if and how frames addressed to the value of the corresponding instance of dot1dTpFdbAddress are being forwarded.
invalid(2) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has not yet been flushed from the table.
learned(3) : the value of the corresponding instance of dot1dTpFdbPort was learned, and is being used.
self(4) : the value of the corresponding instance of dot1dTpFdbAddress represents one of the bridge's addresses. The corresponding instance of dot1dTpFdbPort indicates which of the bridge's ports has this address.
mgmt(5) : the value of the corresponding instance of dot1dTpFdbAddress is also the value of an existing instance of dot1dStaticAddress.
What is sDot1dTpFdbStatus?
Classifies how a forwarding-table entry came to exist: learned(3) is a normal dynamically learned host, self(4) is one of the switch's own MAC addresses, and invalid(2) means the entry aged out but hasn't been purged yet - useful when deciding whether a MAC-table dump reflects live traffic or stale data.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.13464.1.2.2.2.4.4.3.1.3 snmpwalk -v2c -c public <target> GBNDeviceSWAPI-MIB::sDot1dTpFdbStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.13464.1.2.2.2.4.4.3.1.3.1 snmpget -v2c -c public <target> GBNDeviceSWAPI-MIB::sDot1dTpFdbStatus.1
Start monitoring Ethernet switch driver/OEM switch silicon (100Mb/1000Mb queue scheduling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GBNDeviceSWAPI-MIB::sDot1dTpFdbStatus OID value, configure state conditions and alerts, and monitor any Ethernet switch driver/OEM switch silicon (100Mb/1000Mb queue scheduling) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.13464 | admin | ADMIN-MASTER-MIB |
| 1.3.6.1.4.1.13464.1 | dataCom | ADMIN-MASTER-MIB |
| 1.3.6.1.4.1.13464.1.2 | gbn | ADMIN-MASTER-MIB |
| 1.3.6.1.4.1.13464.1.2.2 | gbnDevice | ADMIN-MASTER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.13464.1.2.2.2 | bcmSwapi | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.4 | sRFC1493MIB | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.4.4 | sDot1dTp | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.4.4.3 | sDot1dTpFdbTable | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.4.4.3.1 | sDot1dTpFdbEntry | GBNDeviceSWAPI-MIB |
| 1.3.6.1.4.1.13464.1.2.2.2.4.4.3.1.3 | sDot1dTpFdbStatus | GBNDeviceSWAPI-MIB |