All MIBs › GBNDeviceOEM-MIB › oemArchIfaceDuplexSpeedSet
oemArchIfaceDuplexSpeedSet
Module: GBNDeviceOEM-MIB
OID (symbolic): GBNDeviceOEM-MIB::oemArchIfaceDuplexSpeedSet
OID (numeric): 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: DURABLE: { autonegotiate:all } The desired speed and duplex for this interface. If the selected control is not possible on the interface, a value of illegal(99) is returned. If the port type does NOT support the default of autonegotiate(1), then the application initializes the port to a valid value (e.g., 1000full(6)). Note that not all controls are possible for all interfaces. For example, only full-1000(6) is available for Gigabit Ethernet interfaces.
What is oemArchIfaceDuplexSpeedSet?
This read-write enumerated object configures the desired speed and duplex mode for an interface, among options like autonegotiate(1), full-1000(7), or specific half/full 10/100 combinations, returning illegal(99) if the selected setting isn't supported by the port. Admins use this to force a specific speed/duplex when autonegotiation isn't desired or isn't working correctly with the connected device. For example, setting this to full-100(5) on a port connected to an older device with unreliable autonegotiation would force a fixed 100Mbps full-duplex link instead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.9 snmpwalk -v2c -c public <target> GBNDeviceOEM-MIB::oemArchIfaceDuplexSpeedSet
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.9.1 snmpget -v2c -c public <target> GBNDeviceOEM-MIB::oemArchIfaceDuplexSpeedSet.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.9.1 i <value>
Start monitoring OEM/white-box switch on Broadcom BCM5600 StrataSwitch silicon with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GBNDeviceOEM-MIB::oemArchIfaceDuplexSpeedSet OID value, configure state conditions and alerts, and monitor any OEM/white-box switch on Broadcom BCM5600 StrataSwitch silicon from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.13464 | admin | ADMIN-MASTER-MIB |
| 1.3.6.1.4.1.13464.1 | dataCom | ADMIN-MASTER-MIB |
| 1.3.6.1.4.1.13464.1.2 | gbn | ADMIN-MASTER-MIB |
| 1.3.6.1.4.1.13464.1.2.2 | gbnDevice | ADMIN-MASTER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.13464.1.2.2.3 | bcm5600 | GBNDeviceOEM-MIB |
| 1.3.6.1.4.1.13464.1.2.2.3.1 | oemArchIface | GBNDeviceOEM-MIB |
| 1.3.6.1.4.1.13464.1.2.2.3.1.1 | oemArchIfaceTable | GBNDeviceOEM-MIB |
| 1.3.6.1.4.1.13464.1.2.2.3.1.1.1 | oemArchIfaceEntry | GBNDeviceOEM-MIB |
| 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.9 | oemArchIfaceDuplexSpeedSet | GBNDeviceOEM-MIB |