G6-SFP-MIB :: informationAlarms

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › G6-SFP-MIB › informationAlarms

informationAlarms

Module: G6-SFP-MIB

OID (symbolic): G6-SFP-MIB::informationAlarms

OID (numeric): 1.3.6.1.4.1.3181.10.6.1.34.100.1.17

Node type: OBJECT-TYPE

Type: Bits

Access: read-only

What is informationAlarms?

Bitmask of critical alarm conditions on this SFP covering Tx/Rx power, bias current, supply voltage, and temperature being too low or too high. Any bit set here means the module has crossed a hard operating limit and likely needs attention or replacement.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3181.10.6.1.34.100.1.17
snmpwalk -v2c -c public <target> G6-SFP-MIB::informationAlarms

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3181.10.6.1.34.100.1.17.1
snmpget -v2c -c public <target> G6-SFP-MIB::informationAlarms.1

Start monitoring MICROSENS Generation 6 (G6) managed Ethernet switch (SFP transceiver inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the G6-SFP-MIB::informationAlarms OID value, configure state conditions and alerts, and monitor any MICROSENS Generation 6 (G6) managed Ethernet switch (SFP transceiver inventory) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3181microsensMICROSENS-G6-MIB
1.3.6.1.4.1.3181.10managedSwitchesMICROSENS-G6-MIB
1.3.6.1.4.1.3181.10.6g6MICROSENS-G6-MIB
1.3.6.1.4.1.3181.10.6.1deviceG6-FACTORY-MIB
Numeric OIDNameModule
1.3.6.1.4.1.3181.10.6.1.34sfpG6-SFP-MIB
1.3.6.1.4.1.3181.10.6.1.34.100informationTableG6-SFP-MIB
1.3.6.1.4.1.3181.10.6.1.34.100.1informationEntryG6-SFP-MIB
1.3.6.1.4.1.3181.10.6.1.34.100.1.17informationAlarmsG6-SFP-MIB