Fore-TIMING-MIB :: tcmTxBitsOperMode

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › Fore-TIMING-MIB › tcmTxBitsOperMode

tcmTxBitsOperMode

Module: Fore-TIMING-MIB

OID (symbolic): Fore-TIMING-MIB::tcmTxBitsOperMode

OID (numeric): 1.3.6.1.4.1.326.2.2.1.11.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object refers to the mode of operation for the derived DS1 or E1 outputs. In thresholdAIS mode, AIS is transmitted on the derived DS1 or E1 signal when the transmit reference source becomes unacceptable. In automatic mode, synchronization status messages are passed through on the derived DS1 or E1 output if SSM Automatic Reference Switching is enabled and the DS1 or E1 frame format supports SSM. Otherwise, AIS is transmitted when the reference becomes unacceptable.

What is tcmTxBitsOperMode?

Controls how the derived DS1/E1 BITS outputs behave when their reference degrades: automatic(1) passes through synchronization status messages (if SSM is enabled and the frame format supports it) and only sends AIS when the reference is fully unacceptable, while thresholdAIS(2) always transmits AIS as soon as the reference becomes unacceptable. An admin picks automatic when downstream equipment understands SSM, and thresholdAIS for simpler, more conservative alarm behavior.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.326.2.2.1.11.5
snmpwalk -v2c -c public <target> Fore-TIMING-MIB::tcmTxBitsOperMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.326.2.2.1.11.5.1
snmpget -v2c -c public <target> Fore-TIMING-MIB::tcmTxBitsOperMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.326.2.2.1.11.5.1 i <value>

Start monitoring Fore Systems/Marconi ForeRunner ATM switch (clock/timing synchronization) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Fore-TIMING-MIB::tcmTxBitsOperMode OID value, configure state conditions and alerts, and monitor any Fore Systems/Marconi ForeRunner ATM switch (clock/timing synchronization) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.326foreCOMMON-GOLF-MIB
1.3.6.1.4.1.326.2systemsCOMMON-GOLF-MIB
1.3.6.1.4.1.326.2.2atmSwitchFore-Common-MIB
1.3.6.1.4.1.326.2.2.1hardwareFore-Common-MIB
Numeric OIDNameModule
1.3.6.1.4.1.326.2.2.1.11tcmGroupFore-TIMING-MIB
1.3.6.1.4.1.326.2.2.1.11.5tcmTxBitsOperModeFore-TIMING-MIB