All MIBs › Fore-Switch-MIB › swAlarmReset
swAlarmReset
Module: Fore-Switch-MIB
OID (symbolic): Fore-Switch-MIB::swAlarmReset
OID (numeric): 1.3.6.1.4.1.326.2.2.1.4.1.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
The manager may set this to the value 0 or 1 to cancel a current alarm. This is useful for silencing alarms triggered via edge detection. If this variable is readable, then the alarm is resettable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.326.2.2.1.4.1.1.1.5 snmpwalk -v2c -c public <target> Fore-Switch-MIB::swAlarmReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.326.2.2.1.4.1.1.1.5.1 snmpget -v2c -c public <target> Fore-Switch-MIB::swAlarmReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.326.2.2.1.4.1.1.1.5.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.326 | fore | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2 | systems | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2 | atmSwitch | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.1 | hardware | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.1.4 | environment | Fore-Switch-MIB |
| 1.3.6.1.4.1.326.2.2.1.4.1 | alarmGroup | Fore-Switch-MIB |
| 1.3.6.1.4.1.326.2.2.1.4.1.1 | swAlarmTable | Fore-Switch-MIB |
| 1.3.6.1.4.1.326.2.2.1.4.1.1.1 | swAlarmEntry | Fore-Switch-MIB |
| 1.3.6.1.4.1.326.2.2.1.4.1.1.1.5 | swAlarmReset | Fore-Switch-MIB |