All MIBs › Fore-Switch-MIB › swAlarmMajorRelayState
swAlarmMajorRelayState
Module: Fore-Switch-MIB
OID (symbolic): Fore-Switch-MIB::swAlarmMajorRelayState
OID (numeric): 1.3.6.1.4.1.326.2.2.1.4.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description:
This object indicates the current state of the major alarm relay. If one or more of the alarms (swAlarmType) that are defined major (swAlarmMajorCategory) are currently active (swAlarmStatus), and the alarm cutoff(swAlarmACOState) is off then this object will be on(1).
What is swAlarmMajorRelayState?
This read-only object indicates whether an external major alarm relay is currently activated or deactivated based on whether any major alarms are active and alarm cutoff is disabled. An operator monitors this to trigger external alert mechanisms (such as audible alarms or paging systems) when the switch has serious conditions requiring immediate attention.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.326.2.2.1.4.1.2 snmpwalk -v2c -c public <target> Fore-Switch-MIB::swAlarmMajorRelayState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.326.2.2.1.4.1.2.1 snmpget -v2c -c public <target> Fore-Switch-MIB::swAlarmMajorRelayState.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.326 | fore | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2 | systems | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2 | atmSwitch | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.1 | hardware | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.1.4 | environment | Fore-Switch-MIB |
| 1.3.6.1.4.1.326.2.2.1.4.1 | alarmGroup | Fore-Switch-MIB |
| 1.3.6.1.4.1.326.2.2.1.4.1.2 | swAlarmMajorRelayState | Fore-Switch-MIB |