Fore-Switch-MIB :: swAlarmCriticalRelayState

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › Fore-Switch-MIB › swAlarmCriticalRelayState

swAlarmCriticalRelayState

Module: Fore-Switch-MIB

OID (symbolic): Fore-Switch-MIB::swAlarmCriticalRelayState

OID (numeric): 1.3.6.1.4.1.326.2.2.1.4.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object indicates the current state of the critical alarm relay. If one or more of the alarms (swAlarmType) that are defined critical (swAlarmCriticalCategory) are currently active (swAlarmStatus), and the alarm cutoff(swAlarmACOState) is off then this object will be on(1).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.326.2.2.1.4.1.4
snmpwalk -v2c -c public <target> Fore-Switch-MIB::swAlarmCriticalRelayState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.326.2.2.1.4.1.4.1
snmpget -v2c -c public <target> Fore-Switch-MIB::swAlarmCriticalRelayState.1

Start monitoring Fore Systems (later Marconi) ForeRunner ATM switch (board/port/VPI-VCI inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Fore-Switch-MIB::swAlarmCriticalRelayState OID value, configure state conditions and alerts, and monitor any Fore Systems (later Marconi) ForeRunner ATM switch (board/port/VPI-VCI inventory) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.326foreCOMMON-GOLF-MIB
1.3.6.1.4.1.326.2systemsCOMMON-GOLF-MIB
1.3.6.1.4.1.326.2.2atmSwitchFore-Common-MIB
1.3.6.1.4.1.326.2.2.1hardwareFore-Common-MIB
Numeric OIDNameModule
1.3.6.1.4.1.326.2.2.1.4environmentFore-Switch-MIB
1.3.6.1.4.1.326.2.2.1.4.1alarmGroupFore-Switch-MIB
1.3.6.1.4.1.326.2.2.1.4.1.4swAlarmCriticalRelayStateFore-Switch-MIB