Fore-Switch-MIB :: snmpWarmStart

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › Fore-Switch-MIB › snmpWarmStart

snmpWarmStart

Module: Fore-Switch-MIB

OID (symbolic): Fore-Switch-MIB::snmpWarmStart

OID (numeric): 1.3.6.1.4.1.326.2.2.2.2.2.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The SNMP agent will reset the switch, and restart the switch control software using the existing configuration database when this variable is set to enable(2). After the warm start, the value of this object is disable(1). A warmStart trap is sent after the switch control software restarts.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.326.2.2.2.2.2.4
snmpwalk -v2c -c public <target> Fore-Switch-MIB::snmpWarmStart

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.326.2.2.2.2.2.4.1
snmpget -v2c -c public <target> Fore-Switch-MIB::snmpWarmStart.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.326.2.2.2.2.2.4.1 i <value>

Start monitoring Fore Systems (later Marconi) ForeRunner ATM switch (board/port/VPI-VCI inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Fore-Switch-MIB::snmpWarmStart OID value, configure state conditions and alerts, and monitor any Fore Systems (later Marconi) ForeRunner ATM switch (board/port/VPI-VCI inventory) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.326foreCOMMON-GOLF-MIB
1.3.6.1.4.1.326.2systemsCOMMON-GOLF-MIB
1.3.6.1.4.1.326.2.2atmSwitchFore-Common-MIB
1.3.6.1.4.1.326.2.2.2softwareFore-Common-MIB
Numeric OIDNameModule
1.3.6.1.4.1.326.2.2.2.2snmpFore-Switch-MIB
1.3.6.1.4.1.326.2.2.2.2.2snmpConfGroupFore-Switch-MIB
1.3.6.1.4.1.326.2.2.2.2.2.4snmpWarmStartFore-Switch-MIB