All MIBs › Fore-Switch-MIB › q2931AdminOperSigAlloc
q2931AdminOperSigAlloc
Module: Fore-Switch-MIB
OID (symbolic): Fore-Switch-MIB::q2931AdminOperSigAlloc
OID (numeric): 1.3.6.1.4.1.326.2.2.2.1.6.2.1.1.1.58
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The operating allocation policy for a network side uni. If set to allocVP, the network side uni will allocate connections in its containing VP only. If set to allocLink, the uni will allocate connections in its containing VP and may allocate connections in other VPS that are available to it. If set to allocVpBundle, the uni will allocate connections in its containing VP and a bundle of other VPs which are pre-created.
What is q2931AdminOperSigAlloc?
This object specifies the allocation policy used by a Q.2931 signaling UNI (User Network Interface) on an ATM switch for deciding which virtual paths can be used for new connections. Options include allocating only within the containing VP, using any available VP, or bundling multiple VPs together for better resource utilization. An operator would configure this policy based on network design and traffic engineering objectives for ATM virtual circuit setup.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.326.2.2.2.1.6.2.1.1.1.58 snmpwalk -v2c -c public <target> Fore-Switch-MIB::q2931AdminOperSigAlloc
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.326.2.2.2.1.6.2.1.1.1.58.1 snmpget -v2c -c public <target> Fore-Switch-MIB::q2931AdminOperSigAlloc.1
Start monitoring Fore Systems (later Marconi) ForeRunner ATM switch (board/port/VPI-VCI inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Fore-Switch-MIB::q2931AdminOperSigAlloc OID value, configure state conditions and alerts, and monitor any Fore Systems (later Marconi) ForeRunner ATM switch (board/port/VPI-VCI inventory) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.326 | fore | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2 | systems | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2.2 | atmSwitch | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.2 | software | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.2.1 | asxd | Fore-Common-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.326.2.2.2.1.6 | signalingGroup | Fore-Switch-MIB |
| 1.3.6.1.4.1.326.2.2.2.1.6.2 | q2931Group | Fore-Switch-MIB |
| 1.3.6.1.4.1.326.2.2.2.1.6.2.1 | q2931LayerGroup | Fore-Switch-MIB |
| 1.3.6.1.4.1.326.2.2.2.1.6.2.1.1 | q2931AdminTable | Fore-Switch-MIB |
| 1.3.6.1.4.1.326.2.2.2.1.6.2.1.1.1 | q2931AdminEntry | Fore-Switch-MIB |
| 1.3.6.1.4.1.326.2.2.2.1.6.2.1.1.1.58 | q2931AdminOperSigAlloc | Fore-Switch-MIB |