All MIBs › Fore-Switch-MIB › confTopoSwitchPrefix
confTopoSwitchPrefix
Module: Fore-Switch-MIB
OID (symbolic): Fore-Switch-MIB::confTopoSwitchPrefix
OID (numeric): 1.3.6.1.4.1.326.2.2.2.1.11.10
Node type: OBJECT-TYPE
Type: NsapPrefix
Access: read-write
Description:
The default NSAP (Network Service Access Point) prefix for this ATM switch. The NSAP prefix will be used in the ILMI address registration message as well as the 'hello-indication' SPANS-NNI message.
What is confTopoSwitchPrefix?
This OID stores the network address prefix used by an ATM switch to identify itself to connected networks and devices. Network managers set this value during ATM switch configuration so that the switch can be properly recognized during device registration and communication setup with other network elements.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.326.2.2.2.1.11.10 snmpwalk -v2c -c public <target> Fore-Switch-MIB::confTopoSwitchPrefix
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.326.2.2.2.1.11.10.1 snmpget -v2c -c public <target> Fore-Switch-MIB::confTopoSwitchPrefix.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.326.2.2.2.1.11.10.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.326 | fore | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2 | systems | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2 | atmSwitch | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.2 | software | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.2.1 | asxd | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.2.1.11 | confTopologyGroup | Fore-Switch-MIB |
| 1.3.6.1.4.1.326.2.2.2.1.11.10 | confTopoSwitchPrefix | Fore-Switch-MIB |