All MIBs › Fore-Switch-MIB › confTopoStaticUpdateInterval
confTopoStaticUpdateInterval
Module: Fore-Switch-MIB
OID (symbolic): Fore-Switch-MIB::confTopoStaticUpdateInterval
OID (numeric): 1.3.6.1.4.1.326.2.2.2.1.11.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description:
This is the time interval in milli seconds between successive refreshes of NSAP static routes in the NSAP topology
What is confTopoStaticUpdateInterval?
This OID controls how frequently (in milliseconds) the switch refreshes its static routing table configuration. A shorter interval keeps routes fresher but uses more CPU; a longer interval is more efficient but may miss configuration changes. Adjust this based on how often your network topology changes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.326.2.2.2.1.11.3 snmpwalk -v2c -c public <target> Fore-Switch-MIB::confTopoStaticUpdateInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.326.2.2.2.1.11.3.1 snmpget -v2c -c public <target> Fore-Switch-MIB::confTopoStaticUpdateInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.326.2.2.2.1.11.3.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.326 | fore | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2 | systems | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2 | atmSwitch | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.2 | software | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.2.1 | asxd | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.2.1.11 | confTopologyGroup | Fore-Switch-MIB |
| 1.3.6.1.4.1.326.2.2.2.1.11.3 | confTopoStaticUpdateInterval | Fore-Switch-MIB |