All MIBs › Fore-Switch-MIB › btSecondaryClock
btSecondaryClock
Module: Fore-Switch-MIB
OID (symbolic): Fore-Switch-MIB::btSecondaryClock
OID (numeric): 1.3.6.1.4.1.326.2.2.1.3.2.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
The source of the secondary 8kHz clock. The clock may be used by the management station as the primary or secondary source of the Stratum 3E clock.
What is btSecondaryClock?
This OID selects the signal source for a backup 8kHz timing clock used by the switch. It tells you which external source (like a signal generator or GPS) the switch is using for secondary synchronization. A network operator would configure this to specify a backup timing source for synchronizing voice or timing-critical services.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.326.2.2.1.3.2.1.1.3 snmpwalk -v2c -c public <target> Fore-Switch-MIB::btSecondaryClock
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.326.2.2.1.3.2.1.1.3.1 snmpget -v2c -c public <target> Fore-Switch-MIB::btSecondaryClock.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.326.2.2.1.3.2.1.1.3.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.326 | fore | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2 | systems | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2 | atmSwitch | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.1 | hardware | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.1.3 | timing | Fore-Switch-MIB |
| 1.3.6.1.4.1.326.2.2.1.3.2 | boardTimingGroup | Fore-Switch-MIB |
| 1.3.6.1.4.1.326.2.2.1.3.2.1 | boardTimingTable | Fore-Switch-MIB |
| 1.3.6.1.4.1.326.2.2.1.3.2.1.1 | boardTimingEntry | Fore-Switch-MIB |
| 1.3.6.1.4.1.326.2.2.1.3.2.1.1.3 | btSecondaryClock | Fore-Switch-MIB |