All MIBs › Fore-Funi-MIB › funiIfExtNeighborIpAddress
funiIfExtNeighborIpAddress
Module: Fore-Funi-MIB
OID (symbolic): Fore-Funi-MIB::funiIfExtNeighborIpAddress
OID (numeric): 1.3.6.1.4.1.326.1.16.6.2.1.4
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send SNMP messages, as IP datagrams sent to UDP port 161, in order to access network management information concerning the operation of that system. Note that the value of this object may be obtained in different ways, e.g., by manual configuration, or through ILMI interaction with the neighbor system.This object is a mirror of atmInterfaceMyNeighborIpAddress from the ATM MIB
What is funiIfExtNeighborIpAddress?
This object holds the IP address of the neighboring system at the far end of this FUNI interface, used as the destination for SNMP management traffic to that peer. This value can be set manually by an admin or learned automatically via ILMI interaction with the neighbor, and it mirrors the ATM MIB's atmInterfaceMyNeighborIpAddress object. For example, a network management station would use the address stored here to send SNMP UDP/161 requests directly to the router or switch on the other end of this FUNI link.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.326.1.16.6.2.1.4 snmpwalk -v2c -c public <target> Fore-Funi-MIB::funiIfExtNeighborIpAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.326.1.16.6.2.1.4.1 snmpget -v2c -c public <target> Fore-Funi-MIB::funiIfExtNeighborIpAddress.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.326.1.16.6.2.1.4.1 a <value>
Start monitoring Fore Systems (later Marconi) ForeRunner ATM switch (Frame-based ATM UNI/FUNI) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Fore-Funi-MIB::funiIfExtNeighborIpAddress OID value, configure state conditions and alerts, and monitor any Fore Systems (later Marconi) ForeRunner ATM switch (Frame-based ATM UNI/FUNI) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.326 | fore | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.1 | admin | Fore-Common-MIB |
| 1.3.6.1.4.1.326.1.16 | frameInternetworking | Fore-Common-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.326.1.16.6 | funi | Fore-Funi-MIB |
| 1.3.6.1.4.1.326.1.16.6.2 | funiIfExtTable | Fore-Funi-MIB |
| 1.3.6.1.4.1.326.1.16.6.2.1 | funiIfExtEntry | Fore-Funi-MIB |
| 1.3.6.1.4.1.326.1.16.6.2.1.4 | funiIfExtNeighborIpAddress | Fore-Funi-MIB |