Fore-Funi-MIB :: funiConnFabricServiceIfIndex

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › Fore-Funi-MIB › funiConnFabricServiceIfIndex

funiConnFabricServiceIfIndex

Module: Fore-Funi-MIB

OID (symbolic): Fore-Funi-MIB::funiConnFabricServiceIfIndex

OID (numeric): 1.3.6.1.4.1.326.1.16.6.1.1.4

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: This is the IfIndex associated with the pseudo atm service this connection is mapped to by the agent when this FUNI connection is created. This IfIndex can be converted to a BNP notation value through the IfIndexMapTable of the fore-switch MIB. This ifIndex will be stacked on top of the portIfIndex for a port. That BNP value can be used to establish a connection across the switching fabric by means of the FORE-switch MIB.

What is funiConnFabricServiceIfIndex?

This object reports the ifIndex of the internal pseudo-ATM service that the agent created to carry this FUNI connection across the switching fabric. Because this ifIndex stacks on top of a port's ifIndex, an admin can translate it via the FORE-switch MIB's IfIndexMapTable to get the BNP notation needed to trace the connection through the fabric. For example, cross-referencing funiConnFabricServiceIfIndex with IfIndexMapTable would reveal which physical switch port ultimately carries this FUNI traffic.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.326.1.16.6.1.1.4
snmpwalk -v2c -c public <target> Fore-Funi-MIB::funiConnFabricServiceIfIndex

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.326.1.16.6.1.1.4.1
snmpget -v2c -c public <target> Fore-Funi-MIB::funiConnFabricServiceIfIndex.1

Start monitoring Fore Systems (later Marconi) ForeRunner ATM switch (Frame-based ATM UNI/FUNI) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Fore-Funi-MIB::funiConnFabricServiceIfIndex OID value, configure state conditions and alerts, and monitor any Fore Systems (later Marconi) ForeRunner ATM switch (Frame-based ATM UNI/FUNI) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.326foreCOMMON-GOLF-MIB
1.3.6.1.4.1.326.1adminFore-Common-MIB
1.3.6.1.4.1.326.1.16frameInternetworkingFore-Common-MIB
Numeric OIDNameModule
1.3.6.1.4.1.326.1.16.6funiFore-Funi-MIB
1.3.6.1.4.1.326.1.16.6.1funiConnTableFore-Funi-MIB
1.3.6.1.4.1.326.1.16.6.1.1funiConnEntryFore-Funi-MIB
1.3.6.1.4.1.326.1.16.6.1.1.4funiConnFabricServiceIfIndexFore-Funi-MIB