All MIBs › Fore-DSX1-MIB › dsx1ForeLineLength
dsx1ForeLineLength
Module: Fore-DSX1-MIB
OID (symbolic): Fore-DSX1-MIB::dsx1ForeLineLength
OID (numeric): 1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This variable represents the length of the physical cable connected to the dsx1 port. The user has to set this object to match the physical cable in order to get the netmod to receive the signal on the cable. The different values are: dsx1LineLt40 (1) means the line is shorter than 40m, dsx1Line40-80 (2) means the line length is between 40m and 80m, dsx1Line80-120 (3) means the line length is between 80m and 120m, dsx1Line120-160 (4) means the line length is between 120m and 160m, dsx1Line160-200 (5) means the line length is between 160m and 200m, dsx1LineE1Coax (6) means E1 Coax line, not applicable for T1, dsx1LineTwistedPair (7) means E1 Twisted Pair line, not applicable for T1.
What is dsx1ForeLineLength?
Read-write setting for the physical cable length category, from under 40m up to 160-200m, or E1 coax/twisted pair, that must be set to match the actual cable run so the port can correctly recover the signal.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.3 snmpwalk -v2c -c public <target> Fore-DSX1-MIB::dsx1ForeLineLength
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.3.1 snmpget -v2c -c public <target> Fore-DSX1-MIB::dsx1ForeLineLength.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.3.1 i <value>
Start monitoring Fore Systems (later Marconi) ForeRunner ATM switch (T1/E1 DSX1 WAN interface module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Fore-DSX1-MIB::dsx1ForeLineLength OID value, configure state conditions and alerts, and monitor any Fore Systems (later Marconi) ForeRunner ATM switch (T1/E1 DSX1 WAN interface module) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.326 | fore | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2 | systems | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2.2 | atmSwitch | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.1 | hardware | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.1.1 | asx | Fore-Common-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.326.2.2.1.1.10 | foreDsx1 | Fore-DSX1-MIB |
| 1.3.6.1.4.1.326.2.2.1.1.10.1 | dsx1ForeConfGroup | Fore-DSX1-MIB |
| 1.3.6.1.4.1.326.2.2.1.1.10.1.1 | dsx1ForeConfTable | Fore-DSX1-MIB |
| 1.3.6.1.4.1.326.2.2.1.1.10.1.1.1 | dsx1ForeConfEntry | Fore-DSX1-MIB |
| 1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.3 | dsx1ForeLineLength | Fore-DSX1-MIB |