All MIBs › Fore-Channel-Config-MIB › channelConfigMode
channelConfigMode
Module: Fore-Channel-Config-MIB
OID (symbolic): Fore-Channel-Config-MIB::channelConfigMode
OID (numeric): 1.3.6.1.4.1.326.2.2.1.1.11.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This value indicates the current operating mode of the specified interface. Note that not all modes may be chosen for a particular interface. Also note that even though values are given in the Sonet hierarchy, these values can also be use to set the corresponding SDH hierarchy value if the underlying port is operating in SDH mode.
What is channelConfigMode?
This setting selects how a FORE Systems SONET/SDH interface is channelized: as a single unified STS-12c pipe, four STS-3c sub-channels, or twelve DS3 sub-channels. An admin changes it to match how the physical circuit was provisioned by the carrier, since the interface must expect the same channel structure the far end is using. For example, setting it to ds3X12(2) would split the port into twelve independent DS3-rate channels instead of treating it as one large STS-12c circuit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.326.2.2.1.1.11.1.1.1 snmpwalk -v2c -c public <target> Fore-Channel-Config-MIB::channelConfigMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.326.2.2.1.1.11.1.1.1.1 snmpget -v2c -c public <target> Fore-Channel-Config-MIB::channelConfigMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.326.2.2.1.1.11.1.1.1.1 i <value>
Start monitoring Fore Systems (later Marconi) ForeRunner ATM switch with Channelized OC12 network module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Fore-Channel-Config-MIB::channelConfigMode OID value, configure state conditions and alerts, and monitor any Fore Systems (later Marconi) ForeRunner ATM switch with Channelized OC12 network module from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.326 | fore | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2 | systems | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2.2 | atmSwitch | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.1 | hardware | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.1.1 | asx | Fore-Common-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.326.2.2.1.1.11 | channelControlGroup | Fore-Channel-Config-MIB |
| 1.3.6.1.4.1.326.2.2.1.1.11.1 | channelConfigTable | Fore-Channel-Config-MIB |
| 1.3.6.1.4.1.326.2.2.1.1.11.1.1 | channelConfigEntry | Fore-Channel-Config-MIB |
| 1.3.6.1.4.1.326.2.2.1.1.11.1.1.1 | channelConfigMode | Fore-Channel-Config-MIB |