All MIBs › Fore-CES-MIB › cbrctIdlePatterns
cbrctIdlePatterns
Module: Fore-CES-MIB
OID (symbolic): Fore-CES-MIB::cbrctIdlePatterns
OID (numeric): 1.3.6.1.4.1.326.2.2.2.1.16.2.1.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This contains the patterns for idle detection. For detection based on both idle and mask patterns it contains the idle octet patterns. For detection based on signalling it contains the octet value of AB signalling bits (eg. 00000010 (02H), the bit 0 is B bit and bit 1 is A bit). Maximum of 4 idle patter ns are used. The idle patterns get filled from the least significant byte. The cbrctNoOfIdlePatterns gives the number of idle patterns.
What is cbrctIdlePatterns?
This object holds the configured idle octet patterns (or, for signaling-based detection, the AB signaling bit pattern) used for idle detection, filled from the least significant byte, up to a maximum of 4 patterns as counted by cbrctNoOfIdlePatterns, defaulting to '00007fff'H. An admin sets this to the actual idle byte patterns (or signaling bit values) the connected CBR equipment sends during idle timeslots. For example, a signaling value like 02H (00000010) would represent a specific A/B signaling bit combination the connection should treat as idle.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.326.2.2.2.1.16.2.1.5 snmpwalk -v2c -c public <target> Fore-CES-MIB::cbrctIdlePatterns
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.326.2.2.2.1.16.2.1.5.1 snmpget -v2c -c public <target> Fore-CES-MIB::cbrctIdlePatterns.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.326.2.2.2.1.16.2.1.5.1 i <value>
Start monitoring Fore Systems (later Marconi) ForeRunner ATM switch (Circuit Emulation Service idle-pattern config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Fore-CES-MIB::cbrctIdlePatterns OID value, configure state conditions and alerts, and monitor any Fore Systems (later Marconi) ForeRunner ATM switch (Circuit Emulation Service idle-pattern config) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.326 | fore | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2 | systems | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2.2 | atmSwitch | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.2 | software | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.2.1 | asxd | Fore-Common-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.326.2.2.2.1.16 | cesExtGroup | Fore-CES-MIB |
| 1.3.6.1.4.1.326.2.2.2.1.16.2 | cbrctConfTable | Fore-CES-MIB |
| 1.3.6.1.4.1.326.2.2.2.1.16.2.1 | cbrctConfEntry | Fore-CES-MIB |
| 1.3.6.1.4.1.326.2.2.2.1.16.2.1.5 | cbrctIdlePatterns | Fore-CES-MIB |