All MIBs › Fore-Apsgroup-MIB › apsOperMode
apsOperMode
Module: Fore-Apsgroup-MIB
OID (symbolic): Fore-Apsgroup-MIB::apsOperMode
OID (numeric): 1.3.6.1.4.1.326.2.2.1.1.16.1.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This variable indicates if this port is an active or standby APS channel. If APS is not configured for this port, the mode is notApplicable. loopbackOn indicates that the port is configured in the loopback mode and is the port on which the loopback has been enabled(or is under test). loopbackOff indicates that the port is configured in the loopback mode and is the port which is in the disabled state (not under test).
What is apsOperMode?
This enumerated value reports the current operational APS state of a port: active or standby when APS is in use, notApplicable when APS isn't configured, or loopbackOn/loopbackOff when the port is in a test loopback. Admins check this value in real time to see which of a working/protection pair is currently carrying traffic, or to confirm a loopback test they initiated is actually running on the intended port. For example, after a protection switchover an admin would expect the previously standby(2) protection port to now read active(1), and would see loopbackOn(4) on a port they placed into loopback for cable testing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.326.2.2.1.1.16.1.1.1.5 snmpwalk -v2c -c public <target> Fore-Apsgroup-MIB::apsOperMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.326.2.2.1.1.16.1.1.1.5.1 snmpget -v2c -c public <target> Fore-Apsgroup-MIB::apsOperMode.1
Start monitoring Fore Systems (later Marconi) ForeRunner ATM switch with SONET APS line cards with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Fore-Apsgroup-MIB::apsOperMode OID value, configure state conditions and alerts, and monitor any Fore Systems (later Marconi) ForeRunner ATM switch with SONET APS line cards from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.326 | fore | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2 | systems | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2.2 | atmSwitch | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.1 | hardware | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.1.1 | asx | Fore-Common-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.326.2.2.1.1.16 | foreAps | Fore-Apsgroup-MIB |
| 1.3.6.1.4.1.326.2.2.1.1.16.1 | apsPortGroup | Fore-Apsgroup-MIB |
| 1.3.6.1.4.1.326.2.2.1.1.16.1.1 | apsPortTable | Fore-Apsgroup-MIB |
| 1.3.6.1.4.1.326.2.2.1.1.16.1.1.1 | apsPortEntry | Fore-Apsgroup-MIB |
| 1.3.6.1.4.1.326.2.2.1.1.16.1.1.1.5 | apsOperMode | Fore-Apsgroup-MIB |