All MIBs › FOUNDRY-SN-SWITCH-GROUP-MIB › snSwPortInfoSpeed
snSwPortInfoSpeed
Module: FOUNDRY-SN-SWITCH-GROUP-MIB
OID (symbolic): FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoSpeed
OID (numeric): 1.3.6.1.4.1.1991.1.1.3.3.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
The speed configuration for a port. The values are: none(0)..........link down or no traffic. sAutoSense(1)....Auto-sensing 10 or 100Mbits. s10M(2)..........10Mbits per second. s100M(3).........100Mbits per second. s1G(4)...........1Gbits per second. s1GM(5)..........1Gbits per second master. s155M(6).........155Mbits per second (ATM) (for expansion board only). s10G(7)..........10Gbits per second. s622M(8).........OC12 - 622Mbits per second s2488M(9)........OC48 - 2.488Gbits per second s9953M(10).......OC192 - 9.953Gbits per second s16G(11)..........16Gbits per second. s40G(13)..........40Gbits per second. s2500M(14)..........2.5Gbits per second.
The read-back hardware status are the following: none(0)..........link down or no traffic. s10M(2)..........10Mbits per second. s100M(3).........100Mbits per second. s1G(4)...........1Gbits per second. s1GM(5)..........1Gbits per second master. s155M(6).........155Mbits per second (ATM) (for expansion board only). s10G(7)..........10Gbits per second. s622M(8).........OC12 - 622Mbits per second s2488M(9)........OC48 - 2.488Gbits per second s9953M(10).......OC192 - 9.953Gbits per second s16G(11)..........16Gbits per second. s40G(13)..........40Gbits per second. s2500M(14)..........2.5Gbits per second.
The port media type (expansion or regular) and port link type (trunk or feeder) determine whether this object can be written and the valid values. It is not allowed to change speed for trunks ports. For expansion ports, all of the above speed can be set. However, the value of this parameter may be automatically set whenever the expansion port is connected (e.g. cascade connecting device).
What is snSwPortInfoSpeed?
This object represents the configured or operational speed setting of a switch port interface on a Brocade/Foundry switch. Common values include 10 Mbps, 100 Mbps, 1 Gbps, or auto-negotiated speeds depending on device capability. An operator would use this to verify port speed configuration and diagnose performance or compatibility issues with connected devices.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1991.1.1.3.3.1.1.5 snmpwalk -v2c -c public <target> FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoSpeed
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1991.1.1.3.3.1.1.5.1 snmpget -v2c -c public <target> FOUNDRY-SN-SWITCH-GROUP-MIB::snSwPortInfoSpeed.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1991.1.1.3.3.1.1.5.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.1991 | foundry | FOUNDRY-SN-ROOT-MIB |
| 1.3.6.1.4.1.1991.1 | products | FOUNDRY-SN-ROOT-MIB |
| 1.3.6.1.4.1.1991.1.1 | switch | FOUNDRY-SN-ROOT-MIB |
| 1.3.6.1.4.1.1991.1.1.3 | snSwitch | FOUNDRY-SN-ROOT-MIB |
| 1.3.6.1.4.1.1991.1.1.3.3 | snSwPortInfo | FOUNDRY-SN-SWITCH-GROUP-MIB |
| 1.3.6.1.4.1.1991.1.1.3.3.1 | snSwPortInfoTable | FOUNDRY-SN-SWITCH-GROUP-MIB |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1 | snSwPortInfoEntry | FOUNDRY-SN-SWITCH-GROUP-MIB |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.5 | snSwPortInfoSpeed | FOUNDRY-SN-SWITCH-GROUP-MIB |