All MIBs › FOUNDRY-SN-RT-L3-SWITCH-GROUP-MIB › snIpxFwdFilterRowStatus
snIpxFwdFilterRowStatus
Module: FOUNDRY-SN-RT-L3-SWITCH-GROUP-MIB
OID (symbolic): FOUNDRY-SN-RT-L3-SWITCH-GROUP-MIB::snIpxFwdFilterRowStatus
OID (numeric): 1.3.6.1.4.1.1991.1.2.1.5.1.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row
If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
What is snIpxFwdFilterRowStatus?
This creates, modifies, or deletes a row in the IPX forward filter table -- writing create(4) adds a new filter (returning badValue if the row already exists), delete(3) removes it immediately, and modify(5) updates an existing entry, while invalid(1) and valid(2) are among the readable states. Admins use this single object to manage the full lifecycle of an IPX filter rule instead of separate add/remove commands.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1991.1.2.1.5.1.1.8 snmpwalk -v2c -c public <target> FOUNDRY-SN-RT-L3-SWITCH-GROUP-MIB::snIpxFwdFilterRowStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1991.1.2.1.5.1.1.8.1 snmpget -v2c -c public <target> FOUNDRY-SN-RT-L3-SWITCH-GROUP-MIB::snIpxFwdFilterRowStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1991.1.2.1.5.1.1.8.1 i <value>
Start monitoring Brocade/Foundry FastIron Layer 3 switch (IP routing/ARP/ACL diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FOUNDRY-SN-RT-L3-SWITCH-GROUP-MIB::snIpxFwdFilterRowStatus OID value, configure state conditions and alerts, and monitor any Brocade/Foundry FastIron Layer 3 switch (IP routing/ARP/ACL diagnostics) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1991 | foundry | FOUNDRY-SN-ROOT-MIB |
| 1.3.6.1.4.1.1991.1 | products | FOUNDRY-SN-ROOT-MIB |
| 1.3.6.1.4.1.1991.1.2 | router | FOUNDRY-SN-ROOT-MIB |
| 1.3.6.1.4.1.1991.1.2.1 | snIpx | FOUNDRY-SN-ROOT-MIB |
| 1.3.6.1.4.1.1991.1.2.1.5 | snIpxFwdFilter | FOUNDRY-SN-IPX-MIB |
| 1.3.6.1.4.1.1991.1.2.1.5.1 | snIpxFwdFilterTable | FOUNDRY-SN-IPX-MIB |
| 1.3.6.1.4.1.1991.1.2.1.5.1.1 | snIpxFwdFilterEntry | FOUNDRY-SN-IPX-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1991.1.2.1.5.1.1.8 | snIpxFwdFilterRowStatus | FOUNDRY-SN-RT-L3-SWITCH-GROUP-MIB |