All MIBs › FOUNDRY-SN-IPX-MIB › snIpxSapFiltOnAllPort
snIpxSapFiltOnAllPort
Module: FOUNDRY-SN-IPX-MIB
OID (symbolic): FOUNDRY-SN-IPX-MIB::snIpxSapFiltOnAllPort
OID (numeric): 1.3.6.1.4.1.1991.1.2.1.1.14
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Apply the IPX SAP Global filter list snIpxSapGblFiltList to
all interfaces. This object is used to add all RIP filter
lists and delete all SAP filter lists to/from all ports.
Prior to sending this command, snIpxSapGblFiltList must be ready.
The values that can be written are:
deleteAllInBound(2)...delete all in-bound filter lists from all ports.
deleteAllOutBound(3)..delete all out-bound filter lists from all ports.
addAllInBound(4)......add all in-bound filter lists to all ports.
addAllOutBound(5).....add all out-bound filter lists to all ports.
If set operation is failed, then a SET with
value of (2)or(3) returns error 'GenError'.
Deleted(2)&(3) go away immediately.
The following values can be returned on reads:
noSuch(0)...no such operation yet.
valid(1)....set operation is done and is valid
What is snIpxSapFiltOnAllPort?
Controls whether the global SAP filter list in snIpxSapGblFiltList is added to or removed from every IPX port's inbound/outbound filters in a single write, using the same addAllInBound(4)/addAllOutBound(5)/deleteAllInBound(2)/deleteAllOutBound(3) values as the RIP equivalent, with valid(1) confirming success on read.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1991.1.2.1.1.14 snmpwalk -v2c -c public <target> FOUNDRY-SN-IPX-MIB::snIpxSapFiltOnAllPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1991.1.2.1.1.14.1 snmpget -v2c -c public <target> FOUNDRY-SN-IPX-MIB::snIpxSapFiltOnAllPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1991.1.2.1.1.14.1 i <value>
Start monitoring Brocade/Foundry routing switch (legacy IPX/NetWare) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FOUNDRY-SN-IPX-MIB::snIpxSapFiltOnAllPort OID value, configure state conditions and alerts, and monitor any Brocade/Foundry routing switch (legacy IPX/NetWare) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1991 | foundry | FOUNDRY-SN-ROOT-MIB |
| 1.3.6.1.4.1.1991.1 | products | FOUNDRY-SN-ROOT-MIB |
| 1.3.6.1.4.1.1991.1.2 | router | FOUNDRY-SN-ROOT-MIB |
| 1.3.6.1.4.1.1991.1.2.1 | snIpx | FOUNDRY-SN-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1991.1.2.1.1 | snIpxGen | FOUNDRY-SN-IPX-MIB |
| 1.3.6.1.4.1.1991.1.2.1.1.14 | snIpxSapFiltOnAllPort | FOUNDRY-SN-IPX-MIB |