All MIBs › FOUNDRY-SN-IPX-MIB › snIpxRoutingMode
snIpxRoutingMode
Module: FOUNDRY-SN-IPX-MIB
OID (symbolic): FOUNDRY-SN-IPX-MIB::snIpxRoutingMode
OID (numeric): 1.3.6.1.4.1.1991.1.2.1.1.1
Node type: OBJECT-TYPE
Type: RtrStatus
Access: read-write
Description: Enabled/Disabled System IPX Routing Mode status.
What is snIpxRoutingMode?
Turns IPX routing on or off system-wide on this Foundry device. Set it to enabled(1) to route IPX traffic between interfaces, or disabled(0) to stop the device from routing IPX at all.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1991.1.2.1.1.1 snmpwalk -v2c -c public <target> FOUNDRY-SN-IPX-MIB::snIpxRoutingMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1991.1.2.1.1.1.1 snmpget -v2c -c public <target> FOUNDRY-SN-IPX-MIB::snIpxRoutingMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1991.1.2.1.1.1.1 s <value>
Start monitoring Brocade/Foundry routing switch (legacy IPX/NetWare) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FOUNDRY-SN-IPX-MIB::snIpxRoutingMode OID value, configure state conditions and alerts, and monitor any Brocade/Foundry routing switch (legacy IPX/NetWare) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1991 | foundry | FOUNDRY-SN-ROOT-MIB |
| 1.3.6.1.4.1.1991.1 | products | FOUNDRY-SN-ROOT-MIB |
| 1.3.6.1.4.1.1991.1.2 | router | FOUNDRY-SN-ROOT-MIB |
| 1.3.6.1.4.1.1991.1.2.1 | snIpx | FOUNDRY-SN-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1991.1.2.1.1 | snIpxGen | FOUNDRY-SN-IPX-MIB |
| 1.3.6.1.4.1.1991.1.2.1.1.1 | snIpxRoutingMode | FOUNDRY-SN-IPX-MIB |