FOUNDRY-SN-AGENT-MIB :: snAgWriteNVRAM

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsFOUNDRY-SN-AGENT-MIBsnAgWriteNVRAM

snAgWriteNVRAM

Module: FOUNDRY-SN-AGENT-MIB

OID (symbolic): FOUNDRY-SN-AGENT-MIB::snAgWriteNVRAM

OID (numeric): 1.3.6.1.4.1.1991.1.1.2.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Action object to save all configuration info to NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad flash writing(4)...agent is writing NVRAM flash busy(5).......operation not allowed at this time, flash is busy

The following value can be written: write(3).....do write

The agent will return a response even before the write is done. And the read value will be writing until write is done. And the write request will be rejected until error or normal.

What is snAgWriteNVRAM?

This is a control object that allows operators to trigger a write operation to save the agent's configuration to non-volatile memory (NVRAM) or flash storage. When set to 'write', the agent immediately begins persisting all configuration changes to permanent storage. Operators use this to ensure that configuration changes are saved and will survive a device restart.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1991.1.1.2.1.3
snmpwalk -v2c -c public <target> FOUNDRY-SN-AGENT-MIB::snAgWriteNVRAM

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1991.1.1.2.1.3.1
snmpget -v2c -c public <target> FOUNDRY-SN-AGENT-MIB::snAgWriteNVRAM.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1991.1.1.2.1.3.1 i <value>

Start monitoring Brocade/Foundry ServerIron/NetIron chassis platform (hardware inventory/environmental) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FOUNDRY-SN-AGENT-MIB::snAgWriteNVRAM OID value, configure state conditions and alerts, and monitor any Brocade/Foundry ServerIron/NetIron chassis platform (hardware inventory/environmental) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1991foundryFOUNDRY-SN-ROOT-MIB
1.3.6.1.4.1.1991.1productsFOUNDRY-SN-ROOT-MIB
1.3.6.1.4.1.1991.1.1switchFOUNDRY-SN-ROOT-MIB
1.3.6.1.4.1.1991.1.1.2snAgentSysFOUNDRY-SN-ROOT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1991.1.1.2.1snAgentGblFOUNDRY-SN-AGENT-MIB
1.3.6.1.4.1.1991.1.1.2.1.3snAgWriteNVRAMFOUNDRY-SN-AGENT-MIB