FOUNDRY-MAC-VLAN-MIB :: fdryMacVlanIfEnable

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › FOUNDRY-MAC-VLAN-MIB › fdryMacVlanIfEnable

fdryMacVlanIfEnable

Module: FOUNDRY-MAC-VLAN-MIB

OID (symbolic): FOUNDRY-MAC-VLAN-MIB::fdryMacVlanIfEnable

OID (numeric): 1.3.6.1.4.1.1991.1.1.3.32.2.2.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The administrative status requested by management for MAC-based VLANs on this interface. The value enabled(1) indicates that MAC-based VLANs should be enabled on this interface, When disabled(2), MAC-based VLANs are disabled on this interface. Enable/disable MAC-based VLAN on this interface.

What is fdryMacVlanIfEnable?

This read-write INTEGER, disabled(0) or enabled(1), turns MAC-based VLAN processing on or off for a specific interface, per the description enabling it means MAC-based VLANs should be active on that interface. Admins enable this on ports where they want incoming traffic classified into VLANs by source MAC address rather than a fixed port-VLAN mapping. For example, an admin deploying MAC-based VLANs on an access port for unmanaged devices would set fdryMacVlanIfEnable to enabled(1) on that interface first.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1991.1.1.3.32.2.2.1.2
snmpwalk -v2c -c public <target> FOUNDRY-MAC-VLAN-MIB::fdryMacVlanIfEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1991.1.1.3.32.2.2.1.2.1
snmpget -v2c -c public <target> FOUNDRY-MAC-VLAN-MIB::fdryMacVlanIfEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1991.1.1.3.32.2.2.1.2.1 i <value>

Start monitoring Brocade/Foundry FastIron switch (MAC-based VLAN assignment) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FOUNDRY-MAC-VLAN-MIB::fdryMacVlanIfEnable OID value, configure state conditions and alerts, and monitor any Brocade/Foundry FastIron switch (MAC-based VLAN assignment) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1991foundryFOUNDRY-SN-ROOT-MIB
1.3.6.1.4.1.1991.1productsFOUNDRY-SN-ROOT-MIB
1.3.6.1.4.1.1991.1.1switchFOUNDRY-SN-ROOT-MIB
1.3.6.1.4.1.1991.1.1.3snSwitchFOUNDRY-SN-ROOT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1991.1.1.3.32fdryMacVlanMIBFOUNDRY-MAC-VLAN-MIB
1.3.6.1.4.1.1991.1.1.3.32.2fdryMacVlanTableObjectsFOUNDRY-MAC-VLAN-MIB
1.3.6.1.4.1.1991.1.1.3.32.2.2fdryMacVlanIfTableFOUNDRY-MAC-VLAN-MIB
1.3.6.1.4.1.1991.1.1.3.32.2.2.1fdryMacVlanIfEntryFOUNDRY-MAC-VLAN-MIB
1.3.6.1.4.1.1991.1.1.3.32.2.2.1.2fdryMacVlanIfEnableFOUNDRY-MAC-VLAN-MIB