FILTER-MIB :: swFilterDhcpPortIndex

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › FILTER-MIB › swFilterDhcpPortIndex

swFilterDhcpPortIndex

Module: FILTER-MIB

OID (symbolic): FILTER-MIB::swFilterDhcpPortIndex

OID (numeric): 1.3.6.1.4.1.171.12.37.1.2.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object indicates the module's port number. The range is from 1 to the maximum port number supported by this module.

What is swFilterDhcpPortIndex?

This read-only integer (1-65535) is the port number index for a row in the DHCP port-filter table, identifying which physical port a given DHCP filter enable/disable setting applies to.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.12.37.1.2.1.1
snmpwalk -v2c -c public <target> FILTER-MIB::swFilterDhcpPortIndex

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.12.37.1.2.1.1.1
snmpget -v2c -c public <target> FILTER-MIB::swFilterDhcpPortIndex.1

Start monitoring D-Link managed switch (protocol filtering: DHCP/NetBIOS/L3 control-packet) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FILTER-MIB::swFilterDhcpPortIndex OID value, configure state conditions and alerts, and monitor any D-Link managed switch (protocol filtering: DHCP/NetBIOS/L3 control-packet) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.12dlink_common_mgmtDLINK-ID-REC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.12.37swFilterMIBFILTER-MIB
1.3.6.1.4.1.171.12.37.1swFilterDhcpFILTER-MIB
1.3.6.1.4.1.171.12.37.1.2swFilterDhcpPortTableFILTER-MIB
1.3.6.1.4.1.171.12.37.1.2.1swFilterDhcpPortEntryFILTER-MIB
1.3.6.1.4.1.171.12.37.1.2.1.1swFilterDhcpPortIndexFILTER-MIB