FILE-SYSTEM-MIB :: swFSCopyImageID

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › FILE-SYSTEM-MIB › swFSCopyImageID

swFSCopyImageID

Module: FILE-SYSTEM-MIB

OID (symbolic): FILE-SYSTEM-MIB::swFSCopyImageID

OID (numeric): 1.3.6.1.4.1.171.12.14.5.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Specifies the specific firmware image to copied.

What is swFSCopyImageID?

A read-write integer identifying which stored firmware image (by ID) a copy operation should read from or write to, used when swFSCopyActivity targets file-to-image or image-to-file. Admins set this to select among multiple firmware image slots on the switch during a copy.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.12.14.5.7
snmpwalk -v2c -c public <target> FILE-SYSTEM-MIB::swFSCopyImageID

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.12.14.5.7.1
snmpget -v2c -c public <target> FILE-SYSTEM-MIB::swFSCopyImageID.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.171.12.14.5.7.1 i <value>

Start monitoring D-Link managed switch/appliance (file system/storage capacity monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FILE-SYSTEM-MIB::swFSCopyImageID OID value, configure state conditions and alerts, and monitor any D-Link managed switch/appliance (file system/storage capacity monitoring) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.12dlink_common_mgmtDLINK-ID-REC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.12.14swFileSystemMIBFILE-SYSTEM-MIB
1.3.6.1.4.1.171.12.14.5swFSCopyCtrlFILE-SYSTEM-MIB
1.3.6.1.4.1.171.12.14.5.7swFSCopyImageIDFILE-SYSTEM-MIB