All MIBs › FILE-SYSTEM-MIB › swFSCopyActivity
swFSCopyActivity
Module: FILE-SYSTEM-MIB
OID (symbolic): FILE-SYSTEM-MIB::swFSCopyActivity
OID (numeric): 1.3.6.1.4.1.171.12.14.5.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This command is used to copy a file to another file in the file system. A file located in a drive of a unit can be copied to another file located in another drive of another unit. For any project that does not support the file system on the flash, the system file such as runtime image/configuration / prom /log can still be copied to media or from media that supports the file system via this command using the reserved keyword. The keyword here refers to image-id, config-id, prom, or log.
What is swFSCopyActivity?
A read-write trigger that both configures and starts a copy operation between the switch's file system and reserved system resources: values like file-to-file(3), file-to-image(4), file-to-config(5), file-to-prom(6), image-to-file(7), config-to-file(8), log-to-file(9), and prom-to-file(10) let a config, firmware image, PROM, or log be copied to or from the file system. Admins use this to back up or restore a running configuration or firmware image using the switch's local or removable storage as an intermediate file.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.12.14.5.3 snmpwalk -v2c -c public <target> FILE-SYSTEM-MIB::swFSCopyActivity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.12.14.5.3.1 snmpget -v2c -c public <target> FILE-SYSTEM-MIB::swFSCopyActivity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.12.14.5.3.1 i <value>
Start monitoring D-Link managed switch/appliance (file system/storage capacity monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FILE-SYSTEM-MIB::swFSCopyActivity OID value, configure state conditions and alerts, and monitor any D-Link managed switch/appliance (file system/storage capacity monitoring) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.12 | dlink_common_mgmt | DLINK-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.12.14 | swFileSystemMIB | FILE-SYSTEM-MIB |
| 1.3.6.1.4.1.171.12.14.5 | swFSCopyCtrl | FILE-SYSTEM-MIB |
| 1.3.6.1.4.1.171.12.14.5.3 | swFSCopyActivity | FILE-SYSTEM-MIB |